Sirius Starmate ST2 Satellite Radio Receiver Logo

Related Topics:

A
Anonymous Posted on Feb 04, 2014

Sirus onyx plus with home kit does not power up

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to connect ONYZ home kit sirius to a NAD T775?

Try a factory reset of the receiver.
To perform a factory reset, press and hold the MENU and SOURCE buttons until Factory Reset is displayed. Then Power Off from Back panel for 1 minute and power up normally.
You may have damaged the receiver if you did not power off before installing the Onyx module.
0helpful
1answer

No sound out of subx1 when onyx plus is docked

they aren't compatible. I had same problem. called siriusxm they said its not compatible even though its the same "universal" connector. they said the subx1 was pre merger. I say it shouldn't matter because they have same universal connection.
0helpful
1answer

Backlite display on JVC sirius radio stopped working?

Typical Sirius junk - overheats and display goes out. Buy a new XM Onyx Plus radio instead.
0helpful
1answer
0helpful
1answer

Cannot power up xm onyx radio in docking station; will turn on when not in docking station..what's wrong?

I had the same problem, Bought a new Onyx and tried the supplied 12v power cable on existing Onyx and it worked, So it appears to be the power cable, Hoping now I can find a new power cable,
0helpful
1answer

Can't found a blow fuse on a audiovox sirus sat

TWIST OPEN THE END OF THE CIGARETTE LIGHTER ADAPTER AND YOU'LL FIND A GLASS FUSE IN IT.
BE CAREFUL THERE MIGHT BE A SPRING IN IT THAT HOLDS FUSE DONT LOOSE IT.
1helpful
1answer

My sirus radio displays "aquiring signal" it has worked perfectly for 2 years and now I can't get anything

I had the same problem. If your radio is a kit and not factory installed in your vehicle it could be the magnetic antenna on top of your car. I had mine for about two years and from moving the radio around, or docking and undocking it, the wire from the antenna broke. It was not cut all the way through but it was enough to cause it to loose the signal. Check your antenna where it plugs into the back of the unit.
0helpful
1answer

Connecting Sirus audio to Onkyo HT-R500

Carl- If you are sending a Line Level Audio signal to your ONKYO RECEVER, from your Sirus RCA cable Output, IE, the CD input, the VCR input, the AUX in, ETC. No Need to have the RECEIVER in the FM mode, you are just needing amplificaton of the sound signal or Sirus signal sound.
2helpful
1answer

Sirus radio

I had the same problem and I replaced my car antenna. That resulted in immediate signal improvement. But three months later, the same thing. So, another dot micro car antenna. Three months later, the signal went out again. The home kit worked perfectly. In my case, I bought a Sirius outdoor home antenna and replaced the standard indoor/outdoor antenna that came with the home kit. I took the home kit antenna and connected it to my S50 car kit and positioned the antenna on the front of the dash. No problems since then. Not one. Those dot antennas are horrible. I'd check that before getting a new radio.
Not finding what you are looking for?

86 views

Ask a Question

Usually answered in minutes!

Top Sirius Audio Players & Recorders Experts

John
John

Level 2 Expert

510 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Sirius Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...