In Need of a Code to unlock my Radio Please.

Ford radio codes emailed to you from this link: Car Radio Codes United Kingdom Gumtree

It is only available at a Ford Dealership...Give them your VIN Number & they will give you the code...There is a charge for this service...Now, if you lost battery because you changed or disconnected battery you can avoid this happening in the future...Take a 9 volt battery...Remove the snap top from an old smoke detector...Solder the + lead to positive of cigar lighter plug and - lead to negative of cigar lighter plug...snap on 9 volt battery and plug into lighter BEFORE disconnecting car battery...The 9 volt battery will hold radio up while car battery is disconnected...saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

FORD CD SANYO 14790931 CAR STEREO ONLINE CODE SERVICE

https://www.carstereocode.com/unlock.php?id=7767

You need to get that from the dealer

Please visit here & for a nominal amount recover your code.

When you disconnect your battery and then reconnect itagain, it disables the radio. This is an anti-theft protection for your carradio.
The enable your radio the activation code is in your vehicle owner's manual. Ifyou do not have this code you need to go to your Ford servicecentre and get them to enter this code for you.

I have a Ford radio single cd model fdv200 and is blocked, I need radio code serial number is No.V005203, part no. 8C1T-18C815-AD please help to send feedback on this address or in this Alert [email protected] Thanks.

Your Code should be: 5220
Insert the radio code by repeatedly pressing button 1 until the first number of the code appears on the display. Press button 2 until the second number of the code appears in the display. Repeat the process on buttons 3 & 4 to complete the code. When the code is entered correctly press button 5 and the radio should unlock. It works very well for me

7204 your wish is my command

Hi Geof

Your radio code number should read: 5796.

I trust this will do the job.

I have no other code for your model.

Please let me know if this works.

Bye Ray