I need screw for confidence fitness elliptical

Sup, my elliptical-lovin' friend! Taking apart the Sole E25 Elliptical is actually pretty easy-peasy. Here's what you need to do:
1. Unplug the machine from the wall outlet and move it to an open area where you have enough space to work.
2. Remove the covers that are located on the base of the machine. These covers are held in place with screws that you'll need to unscrew using a standard Phillips head screwdriver.
3. After the base covers are removed, you'll see the ramps that hold the pedal arms. Use a wrench to remove the bolts that hold the ramps in place.
4. Next, remove the pedals by loosening the bolts that hold them onto the pedal arms. Once the bolts are removed, the pedals should slide right off.
5. Finally, remove the console and the handlebars by loosening the bolts that hold them onto the upright post.
And that's it! You've successfully disassembled your Sole E25 Elliptical. When you're ready to put the machine back together, just reverse these steps. Easy peasy, lemon squeezy!
One last tip: make sure to keep all of the screws and bolts in a safe place so that you don't lose them. Trust me, you don't want to be stuck searching for a missing bolt when you're trying to put the machine back together. Happy disassembling!

We are FIXYA dot com. We are not Precor and we certainly don't take credit card numbers. By 'charging bat', you mean battery for the display. The battery is mentioned 67 times in the manual. Press CTRL+F and type in 'battery'. Page 39 and 40, looks to be what you need.

https://primofitnessusa.com/wp-content/uploads/2017/01/V3-precorefx-546i-V3-elliptical.pdf

Links to Precor if you need to buy something?

EFX 546i Elliptical Fitness Crosstrainer - Precor (CA)

www.precor.com > en-ca > efx®-546i-elliptical-fitness-...

Durable 6-phase generator system has no contacting parts, reducing friction and wear, and provides 20 levels to tailor workouts with consistent resistance. The 20 ...

Precor EFX 546i Commercial Series Elliptical Fitness ...

www.amazon.ca > Precor-Commercial-Elliptical-Fitness...

The Precor EFT 546i elliptical has an adjustable cross ramp that allows users to select an angle between fifteen and forty degrees. This allows for isolation of the ...

..

How To Repair a NordicTrack Elliptical

1. Pulse Sensor. Peel off the plastic. ...
2. Console. Charge the battery pack by pedaling the elliptical for several minutes. ...
3. Pedals Squeak and Stick. Loosen screws on the side shield using the Phillips-head screwdriver. ...
4. Tightening and Loosening the Drive Belt

https://www.livestrong.com/article/159137-how-to-repair-a-nordictrack-elliptical/
https://www.youtube.com/watch?v=s779SR-kCko

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

You can find a variety of different crank pullers at the following link.
Search Results for crank puller SPORTSMITH net

in rear cover 4 screws 2 each side and allen key to remove battery

dont know if you got one but I needed a right pedal and it cost me 10gbp from the manufacturer all I had to do is ring them on 01527 598388 and it arrived within 24hrs I was very surprised. item number 23-pedal http://g-ec2.images-amazon.com/images/G/02/uk-sports/Team/B000QZ54MS._V358643820_pdf

Sounds like it needs to be fixed. It will need a new left motor and cord most likely, less likely a lower board.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/russell_1d1c35fa8a5a0be4

You should look into buying a mini-elliptical. They are perfect for small spaces. Here are a few sites that can provide you with more information.

http://www.amazon.com/Stamina-55-1610-InMotion-Elliptical-Trainer/dp/B000VICRO8

http://www.amazon.com/Sunny-Fitness-Elliptical-Trainer-Handlebar/dp/B0016BURUK

http://www.ebay.com.au/sch/sis.html?_nkw=Mini+Elliptical+Trainer+Exercise+Machine+for+Home+Gym

After about 4 years, one day my monitor just wouldn't turn on. After making sure the batteries were new, I took out the four screws on the back of the monitor and made sure the two wire connections were tight. They were, so I called Fitness Quest customer service (1-800-321-9236) from their website (fitnessquest.com). For about $120 including shipping they sent me a new monitor. It took me about a minute to undo the old, plug in the new, and now it works great! The flat connection with the multi-colored wires requires a gentle squeeze with a pliers on the sides while you glently wiggle and pull it apart. Look at the new connector to see how it should come apart. Good luck!

Check it out. If you machine monitor shows and e-1 when trying to turn on. Take out the batteries and unscrew the four screws on the bottom of the monitor unplug it from the elliptical. Put the batteries back in turn on monitor the plug it back to the elliptical while still on and screw back in places. It worked for me hope it works for you too.
Brian Pickens
Long beach ca