One day my picture disappeared and I have audio only.........

Hi there,

Have a nice day.

First of all, definitely your internet must be turned on and you need to activate GPRS or 3G services from your network provider to receive picture messages. If the service is activated then you do not have the settings for those services on your mobile. Call your service provider and ask them to send the service settings on your cellphone. Once the settings are installed, you have restart your phone.

Hope it helps.

Thank you for using fixya.

Hi,

I work for Lenovo and I will provide you with the drivers.

1. Go to Lenovo's Website
2. Select the drivers you need
3. Make sure the drivers you download is for WinXP

I hope it helped you. For further questions about your computer, feel free to reply to this post and I will be more than happy to assist you. Thank you for choosing FixYa!

i think this problem come from your audio driver, check at device manager?is there any yellow mark at device manager?if yes it mean your audio driver not installed
inserd your motherboard cd driver, then install audio driver
another way is from device manager, rihgt click at yellow mark, chose update driver, then follow instruction step by step with motherboard cd driver insertted at cd rom, wait until installation finish and at device manager the yellow mark disappear

after installation try to mplay music

i hope this helpful
thank you for using fixya

may be you need to install audio driver, check it at device manager
follow this step:
go to device manager, look at device manager, is there any yellow mark (?) or (!)?if yes this mean you need to install audio driver, just insert your motherboard cd driver, then click install audio driver, follow instruction at installation until finish, if installation success at device manager the yellow mark will disappear, the try play sound, for example using windows media player, you will get sound at your speaker
i hope this helpful
thank you for using fixya

Hi there, what you need to do is reset the display. Follow these steps :

Step 1 Turn the PS3 off into standby mode (red light on)

Step 2 Press and hold the power button. It will beep when you first press it then beep again 5 seconds later. Release the power button when you hear this second beep.

Step 3 Wait for the PS3 display to reset.

You should now be able to get a picture from your PS3 in standard definition

Hope this helps and thank you for using FixYa

Please try the following solution :

Step 1. Turn the PS3 off into standby (red light on)

Step 2. Press and hold the power button. It will beep as soon as you press it and then about 5 seconds later it will beep again. Let go of the power button when you hear this second beep.

Step 3. Wait for your PS3 to start.

This solution basically resets the video output back to standard definition.

Hope this helps and thank you for using FixYa

Try the following steps to solve your PS3 problem :
Step 1. Turn the PS3 off into standby (red light on)
Step 2. Press and hold the power button. It will beep as soon as you press it and then about 5 seconds later it will beep again. Let go of the power button when you hear this second beep.
Step 3. Wait for your PS3 to start.
This solution basically resets the video output back to standard definition.
Hope this helps and thank you for using FixYa

Please carry out the following steps to fix your PS3 :

Step 1. Turn the PS3 off into standby (red light on)

Step 2. Press and hold the power button. It will beep as soon as you press it and then about 5 seconds later it will beep again. Let go of the power button when you hear this second beep.

Step 3. Wait for your PS3 to start.

This solution basically resets the video output back to standard definition.

Hope this helps and thank you for using FixYa

You may need to reset the output video back to standard definition. Sometimes the PS3 "forgets" what video output it has been using.
Follow these steps :-

Step 1. Turn the PS3 onto standby (red light on)

Step 2. Press and hold the power button. It will beep when you first press it, then beep again 5 seconds later. When you hear the second beep let go of the power button.

Step 3. Wait for your PS3 to start up

Hopefully this will reset the video back to standard definition and you should now get a picture.

Hope this helps and thank you for using FixYa

you need to install audio and modem driver(both)


Conexant High-Definition Audio Driver

Conexant HDAUDIO Soft Data Fax Modem with SmartCP Driver
please go to:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&lang=en&product=3694963

to obtain manufacturer drivers, this will solve your problem
vcrtech