Error code e 100 in canon 405

https://www.manualslib.com/manual/1203350/Canon-Gp405.html?page=488&term=e100&selected=2#manual

Also, you can download a copy of the service manual here"

If you have error 301, 100 & 220, just open the cover of scanner and clean the scanner lens and just remove white strip of the board and clean and replace it, then its works successfully

03364041028

Cannon. imageclass mf 4750. e100-0001 error who clear

Code Error name/description

E000 fixing overheating

E001 fixing assembly overheating

E002 fixing assembly low temperature

E003 post-standby fixing low temperature

E007 fixing film rotation error

E010 main motor rotation error

E014 fixing motor rotation error

E019 waste toner case full, waste toner case full sensor error

E020 toner clogging between sub hopper and developing assembly

E024 developing assembly connector disconnection

E025 hopper motor, bottle motor error

E032 NE controller counter error

E064 power supply voltage error (high-voltage)

E100 BD interval error

E110 scanner motor error

E191 communication error for high voltage power supply

E202 CIS home position detection error

E225 CIS light intensity error

E227 reader unit power supply error

E248 backup memory error

E261 zero-cross signal error

E315 image data error
E400 feeder communication error

hi there

first replace the drum (i.e the photoconductive cylinder)
I wish you solve the problem.

thank you and not forget to vote me any how.

E100 means that you have laser trouble, probably laser pcb is bad. Replace it.
But also check the laser shutter.

Hey
How can I solve this error code(IR1600) on my canon copier by myself?