Husqvarna meister 165 - Husqvarna Husky 165

That control should be repairable. You could open it just to see if a wire has come loose and touching the other wire causing it to short. Dont loose the cord, you can use a generic controll but you need that cord.

Try this:

Good Luck

http://www.gotutomanual.com/archive/h/husqvarna-meister-145-165-sewing-machine-service-manual.pdf

Maybe crancase sealings is not so good. i had same problem vith old saw.

Try www.sewingonline.co.uk/instructions

This is under the sewing machine category. You might want to resubmit under correct category if this is still an issue.

Your 165 takes one of the most common foot styles in the industry. You should be able to find one at any sewing store. It is a low shank, snap on style. The fact that your bobbin in NOT a drop in style matters. Tell the person at the store you go to that your bobbin loads from the front. Taking the ankle that the feet attatch to and your regular foot would also help them get your the right one.

Take the machine to an independent dealer and let him show you it works before you buy it.
sewman7

If there is one it'll be underneath the saw just behind the clutch cover/side plate. Though some of the smaller cc / hobby saws don't have an oil adjustment screw. happy hunting

I suggest that you visit the Husqvarna web site and put your model number in the serch, there is a lot of info there. Here is a link to the site.
http://www.husqvarnaviking.com/us/

good luck

I'm looking for a owner's manual too. If I find out how to get one i will let you know. mommy9