"Services ON" Displays, but no time

No trick, does it display "Password:" ?

Nothing displays during password entry, even if you get it wrong. All you can do is press the RETRY softkey and try another. Likely you're using the wrong password.

You also must subscribe, with your local phone company and have caller ID, it is a feature and they do charge a monthly fee for it. If you do have that feature and are still having trouble,

Below the event message it should be also display"time" and "clear"on the screen. There are two corisponding soft keys below the two words. Press the clear key to erase the message from your display.

On the set displaying the message enter feature #871.

Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say A. Configuration. The 4 top line/feature keys are now used for programming.
Press "NEXT"(bottom right arrow)
display should read B.General Administration.
Press the show key (top right arrow)
display should read 1.speed dial
Press the next key 2 times(bottom right arrow) .
display should say 3.time and date
Press the show key (top right arrow)
display should show current programmed time
Press the Change key
Enter in time in 12 hour format
press ok
press either Am or PM when prompted
press ok
press the Rls key when finished

Two ways to change time on old and new norstar. Old go in to admin programming and step to time adn date then change time. New system go to t7316 phone and push feature key plus **time then change time

Go to programming of Norstar which will be F**266344 password will be 266344.
Dispaly shows u terminal and extensions.
press show
then next display will show u capabilities.
Press show then next display will show u FWD no answer.press show then next.and change the ringing as per ur requirement.

log in thru a telset and when the 4 lights light up on the right hand side of your phone hit the bottom right button till you get to time and date and you change there.

We would like to change the name displays on our phones

feature **time

and feature **date