Fuel pumb Wire loose, need 2000 acur 3.5 RL fuel pump Wiring Diagrams

Here's a wiring guide for the fuel pump on a 2000 Cadillac Deville: 1. Remove the fuel tank and access the fuel pump module. 2. Disconnect the electrical connector from the top of the fuel pump module. 3. Locate the wiring harness that runs from the fuel pump module to the car's electrical system. 4. Cut the wires on the old fuel pump module connector, leaving enough wire to splice the new connector onto. 5. Connect the black wire from the new fuel pump module connector to the black wire in the car's wiring harness. 6. Connect the purple wire from the new fuel pump module connector to the purple wire in the car's wiring harness. 7. Connect the gray wire from the new fuel pump module connector to the gray wire in the car's wiring harness. 8. Connect the black/white wire from the new fuel pump module connector to the black/white wire in the car's wiring harness. 9. Connect the new fuel pump module electrical connector to the car's wiring harness connector. 10. Reinstall the fuel tank. Note that it is important to follow the wiring guide carefully to ensure proper installation and avoid damaging the fuel pump or electrical system. If you are unsure about any step of the process, it is recommended to seek assistance from a professional mechanic or refer to the vehicle's service manual.

1st check you fuses
2nd check under dash for loose harness wir3rd check for a good ground.

Mike

images for 2000 chevy truck 3500 check wiring on

How to Install New GM Wire Harness on Fuel Pump Module ...

? 3:10
https://www.youtube.com/watch?v=FffdzqknP3k
Apr 20, 2012 - Uploaded by Airtex Pumps
This video is about how to install a new Airtex fuel pump module into some GM ... fuel pump and gas tank to a 98 internal fuel pump and gas tank on my truck 88 gmc. the wires are a little different. .... Check the power & ground at the pump. ... CHEVY SILVERADO FUEL PUMP CHANGE OUT.2500HD 2001.

How to test an electric fuel pump - YouTube

? 13:54
https://www.youtube.com/watch?v=Q3ZiTsKCdO8
Feb 3, 2012 - Uploaded by ScannerDanner
2001 GMC 3500 8.1L engine with no fuel pressure. In this video I am showing how to test the fuel pump electrical circuit using atest light and scan tool. ... seconds on the ground wire. when i unplug the harness from the the fuel pump .... need help newfuel pump chevy venture 2004 runs for a few days then ...

How to Install Fuel Pump E3947M in 1997-2000 Chevrolet ...

? 5:53
https://www.youtube.com/watch?v=9LLLRVnItbI
Apr 20, 2012 - Uploaded by Airtex Pumps
Applications: 2000-97 CHEVROLET/GMC C, K 1, 2, 3 TRUCK 262... Please check out our 'How to Install New GM Wire Harness onFuel Pump ...

About 232,000 results (0.81 seconds) Search Results

How to Install New GM Wire Harness on Fuel Pump Module ...

? 3:10
https://www.youtube.com/watch?v=FffdzqknP3k
Apr 20, 2012 - Uploaded by Airtex Pumps
This video is about how to install a new Airtex fuel pump module into ... When included the wiring harness ...

How to Install Fuel Pump E3947M in 1997-2000 Chevrolet ...

? 5:53
https://www.youtube.com/watch?v=9LLLRVnItbI
Apr 20, 2012 - Uploaded by Airtex Pumps
Applications: 2000-97 CHEVROLET/GMC C, K 1, 2, 3 TRUCK 262 ... This will give you the extra height ...

How to test an electric fuel pump - YouTube

? 13:54
https://www.youtube.com/watch?v=Q3ZiTsKCdO8
Feb 3, 2012 - Uploaded by ScannerDanner
2001 GMC 3500 8.1L engine with no fuel pressure. In this video I am showing how to test the fuel pump ...

2000 Chevy 1500 4WD. Replaced fuel pump, no power ...

They are 2 ways to get this. An internet search using your year make and model car with the term fuel pump wiring or wiring diagram usually pulls up a collage of good diagrams. Or the autozone site has a help site at the bottom of its help page, There is a free part and a pay part, but free info will supply diagrams.

On this website, you find fuel controls wiring diagrams for Acura TL (1998)

Acura TL 1998 wiring diagrams fuel controls

On this website, you find free wiring diagrams for Acura RL

RL CARKNOWLEDGE

CODE P1203 CYLINDER NUMBER 3 MISFIRE CODE P1300 RANDOM MISFIRE DETECTED. POSSIBLE CAUSE BAD SPARK PLUGS OR FAULTY WIRES.CHANGE FUEL FILTER CLEAN FUEL INJECTORS. MORE THAN 1 CYLINDER MISFIRE COULD BE LEAN FUEL MISFIRE.

Should be in a relay box under the hood. If you don't see it there, please reply and I'll try to track it down on a wiring diagram.

fuel pump may be going out stand by the end of the car and try to ear the pump making sounds if it dosen't make any sounds then it bad hope this info helps