Need sharp tv codes

Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

jose_luis_es,

I have listed the steps below to address the remote to your TV! I have also included the top 5 codes that work in case they are needed.

Codes: 500, 837, 627, 090, 185

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter the code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Let me know if you need additional assistance!

Tommy Faust
DISH Social Media Representative

Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes

Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...

My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...

Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya

In order to program the remote to a TV set, hold the clear "TV" button in the upper left hand corner four four seconds or until all four of the mode buttons light. Next press in one of the three digit codes below followed by pound (#) Remote codes: 590, 683, 720, 591, 543, 593, 813, 542, 533, 652, 726, 611, 500, 503, 627, 661, 956, 591, 694, 666, 252 After trying each code press the volume and power buttons, if they control your TV set be sure to press the "SAT" button.

Daniel Busa
DISH Network
Customer Service

Hola sharkys_cybe para programar su control de DISH Network para su televisor Sanyo hay varias formas que se puede hacer. La primera forma es mantener pulsada la tecla TV hasta que todos los botones de modo de luz y luego los códigos de la TV Sanyo son: 590, 683, 090, 121, 500, 183, 111, 589, 542, 754, 621, 563 , 512 o 652 suguiente del codigo presione el signo de #. Yo también dejo el link para ayudar con una "exploración de energía". http://www.dishnetwork.com/SupportSection/power-scan-instructions

hy2277

I have provided a link on how to program the remote to your TV so you can control the volume and turn the TV off/on. I have also provided the codes available for your Sanyo TV. I hope this helps.

Instructions on programming the remote to TV:

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml
Ray Calo
DISH Network

scorpionjdl6

I have provided a link with instructions on how to program the remote to your Magnavox TV and with the remote codes. I hope this helps.

http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

You need to call DishNetwork and program the remote. The remote does not know your TV code. Easy fix.

These are the codes for Sanyo TV'S for this remote. The newer TV codes are at the end so work in reverse order when inputting these codes. Thanks for using Fix Ya.
542, 589, 590, 591, 592, 609

dish network remotes are universal, you can program your receiver, vcr/dvd, telivision and stereo to most remotes. if you need info on this just post again, otherwise i would list your issue under the remote brand