I want to remove the stand so that I can mount it onto a wall mount that I have ready. How do I remove the stand.
SOURCE: Where can we find a TV pedestal stand
You will have to send them an email on there website here's a link to the contact us page
CLICK HERE
Tell
them you need to buy a replacement stand and give them the model number
of the TV. They will reply with an amount and payment methods. Ive done
this before for replacement remotes and monitor stands. Good luck and have a good day, Dantechcom.
SOURCE: removing base from tv
I researched this problem on the net and found the solution. Someone on one of the posts said the base can be removed by taking out four screws - all from the back of the TV. One screw is the one closest to the power plug, the next screw is beside it, the remaining two screws are the corresponding screws on the opposite side of the base panel (still on the back of the TV). Once these screws are removed the base comes off including the mounting bolt and the rectangular shaped plastic panel. There are no electronics or any components inside the base panel, only the bolt and plastic base which are held on by the four aforementioned screws. It was very easy to remove!
SOURCE: Westinghouse SK32H240S 32'' LCDHDTV Picture appears and Disappears
This problem is caused from a problem with the main board. The main board will need to be replaced. It runs from $100.00 to $150.00.
SOURCE: How to wall mount
u have to get a wall braked to do this.......go to a store where they sell televisons and they will help u with ur problem.....also it eill have a installation guide enclosed in the carton
132 views
Usually answered in minutes!
×