Lost connection try again, and stops me getting on to web sites

This does happen occasionally but is not a typical thing. This means that you have either lost network access to the system or a service on the system has stopped. The system will have to be rebooted to get things going normally again. The preferred method (since you can do it through netset) is to connect to the console port with a DB9 straight through serial cable and open hyperterm or putty and connect to it at 9800, 8, 1 none settings. Hit ctrl r and the system will reboot. if you don't have a serial cable then you are forced to pull the power or switch it off and then back on. CAUTION: you risk a database corruption every time the system loses power without closing the database properly (netset or ctrl r through the console) so do this as a last resort. Also, the system will do a disk scan (except V3001) and will take 15 to 45 minutes to complete before the system will start to function again. DO NOT UNPLUG IT AGAIN WHILE IT IS DOING A DISK SCAN! You can tell if it is doing the scan by looking at the S1 and S2 lights on the Call Processor. During a disk scan, they will be alternating back and forth (like police lights). Wait for it to complete and try netset again. I recommend doing a fresh reboot through netset after it comes back up just to be sure it's a fresh clean boot.

The operating system files may have been deleted and the laptop cannot boot up. To get the laptop operating again you can try a Windows Repair, failing that you need to install Windows again.
To do a Windows Automatic System Repair for Windows XP, follow the instructions from this WEB site -

http://www.helpwithwindows.com/WindowsXP/howto-18.html
To do a Windows Automatic System Repair for Windows 7, follow the instructions from this WEB site -
http://windows.microsoft.com/en-AU/windows7/help/system-repair-recovery

To recover your data before you install Windows - remove the hard drive from the laptop and connect it to the USB hard drive adapter then connect it to a working computer's USB port. This computer will see the USB hard drive adapter and hard drive as an external storage device, you can then open the folders and files on the hard drive and copy the data files to the computer and to backup your files.

make sure that you have the right access point.
depending on your network, your phone may use different access points for multi-media messaging, streaming, and web browsing.

you can manually input these access points in
Settings>>Connection Settings
or
Settings>>Phone Settings >>Connection Settings

and look for Data Packets, or Access points.

or you can have your network provider send you the configurations by providing them your unit model by calling their hotline. Most network providers should have this service for free.

Windows 7 firewall program is blocking your program.

hello, when you say after connecting to AOL 9.0 internet connection is lost, do you mean aol explorer doesn't work, or do you mean IE stops open pages and it was openning before starting AOL? if you close out your AOL does IE then starts working? or tell me what do you have to get it working again?

thank you
Amar Sondhi

check your default web starter maybe it is set in yahoo.australia

Go to lexmark web site, go to support and search product or model number. Download software drivers. Install drivers.

download cd again from webcam site

if your pc is networked disconnect it.install a good antivirus software like quickheal.then download it again.it will work fine.

id u have lost ur cd drivers go on this site http://www.cybersnipa.com/us/downloads/drivers_and_manuals.php