How to switch off psm in bpl tv?

If you wish to get some details; check the site linked here. Pull up older posts.
https://elektrotricks.blogspot.com/
https://electronicshelponline.blogspot.com/
faults & possible causes of LCD & CRT screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter. See it in Webview with mobile or by desktop. Mobile View has no search box.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Type in the brand name or the IC number used with your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

BPL Prima has the capacity of 100 programs only. There is no other way to increase its capacity.
google.com/+GopakumarGopalan Gopakumar Gopalan Google

Without a remote control, you can't select its inputs. Buy one universal remote control, which have setup codes to BPL, or an original number. If you wish to get more details about the setup codes and setup procedure, check these links. http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

You might try hitting the MENU button on the tv itself to see if you are able to select input / source that way. Some TVs also have the Aux Inputs selected by scrolling through the channels until you come to the aux inputs.

Picture Status Memory(PSM): Selects excellent preset picture controls for multi-media, personal, movies, sports, and weak signal programs. usually on remote control, or in TV setup.

You need to use your manual and turn it Off.

press one time display key and three times mute .service mode will open

Hello dmay006,

Are you releasing the SEL button after the receiver enters the PSM mode? As soon as the display changes, you should release the SEL button and then use the "up" button to scroll to the "item". Each time you press the "up" button, the display should change. When it reads "CLOCK HOUR", use the volume control to adjust the setting. Press the "up" button once again to advance to "CLOCK MIN" and adjust it with the volume control. Press SEL briefly once again to exit the PSM mode. Once in PSM mode, if no other button has been pressed within about 3-5 seconds, the receiver will automatically cancel the PSM mode.

If you are following this procedure and the receiver will not let you into the PSM mode or let you switch from item to item with the "up" "down" buttons, then it is most likely defective and requires service or replacement.

Hope this helps.

I HAVE BPL TV FZR 21. IT IS LOCKED. HOW CAN I UNLOCK IT

Hello atesha23,

Below is the step-by-step procedure for setting the JVC clock. Please note that after you have entered the PSM mode, if you have not pressed a button for about 2 seconds, the radio will automatically exit the mode and return to normal operating mode. In that case, you must restart PSM by holding the "SEL" button until the display changes.

(1). Enter the PSM mode by pressing and holding the
SEL button until the display changes.
(2). Use the rocker switch left/right until "CLOCK
H" is displayed.
(3) Set the clock hours by turning the volume
control up/down.
(4) Press the rocker switch again until "CLOCK M"
is displayed.
(5) Set the clock minutes by turning the volume
control up/down.
(6) Press the SEL button to finish and EXIT.

Hope this helps.