Did u check your wiring from the receiver to xm antenna... or the positioning of the antenna. try to work on it where the antenna has no obstructions.... Basically u can see the sky,,lol I know it sounds funny, but that way if its working you will get the best receptionDid u check your wiring from the receiver to xm antenna... or the positioning of the antenna. try to work on it where the antenna has no obstructions.... Basically u can see the sky,,lol I know it sounds funny, but that way if its working you will get the best reception
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
http://parts.pioneerelectronics.com/part.asp?productNum=XMTSE-XMPIH-01 $53.50 retail from pioneer. Any XM2GO dock should work, there are a few home docks on ebay now. You may need to modify it so it can fit your radio, but the pins are all the same.
Simple. Go to http://xmfanstore.com , click on "Antennas and Extensions" under "Shop Categories" on the left most side of the site; there you will find "XMFanStore XM2go Direct Connect Antenna Adapter" .
It plugs into the SIDE antenna port of your XM unit and you plug the antenna into that.
No, you cannot charge the AirWave with a USB, you CAN charge a SkyFi3 only with a USB, but the AirWave (all XM2Go clones) require a 5Volt 2000ma (2A) power supply either a 'wall wart' or cigarette lighter plug.
Are you still having this problem? Sounds like you just aren't getting a good signal. Antenna is not properly mounted, not getting good singal.
Or, the antenna and/or cable is damaged.
It occured to me after plugging it into the car adapter and turning on the car ignition. I ended up sending the unit to Panasonic and they sent me another. This must be a known issue.
×