7 red flashing lights, won't power up..

Depend flashing code ,
7 blinks Sc board bad
10 blink power board bad

I have the model Philips 37PF7320A/37 won't turn on and MOST articles on the Internet say it's the Capacitors capictors capictors..I checked all of them. My tv just blinked red lights, had the clicking sound at first power on, but then goes black. No sound. No picture. Nothing. Just blinking red lights.

MINE WAS RESISTOR no. 3318 , a 100 OHM RESISTOR ON POWER SUPPLY BOARD.

I BOUGHT REPLACEMENT FOR .99 CENTS SOLDER IT, AND EVERYTHING WORKED!!!

THAT WAS ALL IT TOOK.

JUST A SUGGESTION..
1. CHECK FOR BULGING CAPACITORS (90 PERCENT OF THE PROBLEM)
2. THEN CHECK FOR RESISTORS WITH MULTIMETER ( FALLS INTO THE OTHER 10 PERCENT OF THE PROBLEM.)

TELL ME IF THAT [email protected]

philips 42 plasma flashing blinking 4 red lights 42PF7321D/37 screen does not come on need help

42PF7320A: 7 blinks is missing 8.6VDC from supply -- connector CN-1M46, pin 3 (out of 11 pins), goes from power supply to main/input board.

my 42 inch phillips, i turn it on green light comes on for 10 sec then red light comes on and flashes 4 times then stops for 5 sec then repeats.

6-7 blinks means there is an issue with the power supply...
I found a replacement for my 42pf9631d/37
Part # Lj44-00117A
at TSM Inc. for $110.95 with free shipping...
http://www.tristatemodule.com/p-10120-lj44-00117a-samsung-tv-module-power-supply.aspx

Check the power board for caps with the tops bulged up. 3300uf 10v.

How many times is the led flashing or is it flashing???

did u cheak the input cables does it do it on dvd input as well as others ?

Hallo I have exactly the same problem it is a 7 years old plasma and i have localisation on the power and fd module but i have not find the defective components............
Jockes........................