Red light that shows a message waiting won't go off after all messages have been heard and deleted.

The red light flashing on your handset could indicate that the phone is in an alert state, or that there is an incoming call or message. To turn off the red light flashing on the handset, you can try the following steps:

1. Check the display: Make sure that the phone is not in silent or vibrate mode, and that the ringer volume is turned up.
2. Check for missed calls or messages: See if you have any missed calls or messages that could be causing the red light to flash.
3. Check for other alerts: See if there are any other alerts, such as low battery or signal strength, that could be causing the red light to flash.
4. Check for software updates: Make sure that your phone is running the latest software update. Sometimes, software updates can fix bugs that cause issues like this.
5. Check the settings: Go to the settings of your phone and check the display settings, make sure the red light is turned off.
6. Check with the phone's manufacturer: If the problem persists, you may want to contact the phone's manufacturer for further assistance or check if the device is still under warranty.

Hi , First of all, Level 1 Notifications are sent to the smartphone to indicate when important or urgent messages are sent. To disable this or turn off,
Depending on the phone you are using: (the steps below are for Blackberry)

1. Go to your RingTone Profile setting (the one where you change what kind of ring/vibrate that you want)
2. Scroll down and click on Advanced
3. Click into your Ringtone Profile
4. Click on "Level 1 Messages"
5. Click on "Repeat Notification" and change it from "LED Flashing" to "none"
6. (Make sure that you do it for what is called "In Holster" and "Out of Holster")

Hope this helps. On another note; sometime, when you delete a call while the missed call is Bolded... the red light will continue to flash. What happened was, the link between the light and the deleted call has unsynchronized and therefore caused the red light to constantly blink. There is one way to restore it back to normal, but no guaratees.... place another voice call to yourself, (use a landline phone to make the call to your mobile). Let the call complete and have it show up as missed. Go into your missed calls and click on it to change the status to "read". It should restore back to a green flashing light. IF not, you have to either wait 10 mins for it to stop, or pull the battery out to soft reset the device back to normal operation.

You're probably subscribed to a voicemail system offered by your telephone company, and the phone is telling you there are messages waiting. Please contact your telephone company for instructions on accessing their voicemail system.

Does your phone service provide you with a voicemail box? If so, you likely have a message waiting for you on your voicemail inbox.

Press the "Callers" button, then the "Delete" button. This will erase all caller history, but should fix the light problem.

The term we used for this back when I worked for the phone company was a "stuck message waiting indicator" and the way to fix it was:

Call yourself and leave a message.
Hang up and wait 2 minutes (we used to say 5 minutes, but 2 is plenty)
Retreive/delete your voice mail message
Hang up and wait 2 minutes


That should clear the blinking light.

The red blinking light is an 'event' light, it does not necessarily mean a message is waiting for you, it will also start to flash if you have a missed call.
click 'up' on the round button to show the missed calls list and it will stop flashing, at least it does on mine!

The term we used for this back when I worked for the phone company was a "stuck message waiting indicator" and the way to fix it was:

Call yourself and leave a message.
Hang up and wait 2 minutes (we used to say 5 minutes, but 2 is plenty)
Retreive/delete your voice mail message
Hang up and wait 2 minutes


That should clear the blinking light.

Here are sample paragraphs from the user manual : hope it helps !

The new message LED on the handset flashes when you have new messages in your
answering system. The LED stops flashing when all new messages are played back.

3) To delete all messages, press delete messege in standby mode. Press delete
messege again after the announcement "To delete all messages, press delete
again."
When you try to delete all messages without first listening to your new messages,
you hear several short beeps followed by an announcement "Please playback all
messages." This protects you from accidentally erasing messages you have not yet
reviewed.
Important:
When you press delete messege, you are permanently deleting the message. Once
deleted, the message cannot be replayed or retrieved.

I called support - took forever to get through
Told to unplug phone line, batteries, and AC, then wait 15 minutes.
Then reintall in order of batteries, then AC, then phone.
But once the AC gets plugged in, the light starts blinking again.
The technology of bluetooth with my cell is great, but the interface sucks and the light that won't properly recognize things is incredibly annoying. This one is going BACK....