Boot up what are the keys to press to boot up LG KS360 ?

This LG is PDA phone,so you cannot Unlock it as free of cost,You can get the paid Unlock code at here Simpleunlocking.com and follow the instructions below and Unlock it step by step,then You can use any GSM network,Specify the Network,country it locked and get the code...
LG KS360 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your LG KS360 mobile phones. If you enter over a certain amount of wrong unlock codes on your LG KS360 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your LG KS360 with its ORIGINAL SIM Card,
2 - Enter 2945#*71001#,
3 - Sim unlock mode pop up,
4 - Enter the unlock code and press ok,
5 - The LG KS360 will then reboot and the unlock is complete.

ORIGINAL : We mean, to use the sim card that was originally given to you by your network/service provider along with the LG KS360.

yes, surely you can unlock your LG KS360 model mobile, through codes because it is easy and safe also,
Follow these instructions :

Warning : Do not enter any wrong unlock codes on your LG KS360 mobile phones. If you enter over a certain amount of wrong unlock codes on your LG KS360 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your LG KS360 with its ORIGINAL SIM Card,
2 - Enter 2945#*71001#,
3 - Sim unlock mode pop up,
4 - Enter the unlock code and press ok,
5 - The LG KS360 will then reboot and the unlock is complete.

ORIGINAL : We mean, to use the sim card that was originally given to you by your network/service provider along with the LG KS360.

After that get the unlock code from this site http://www.onlinegsmunlock.com/lg-ks360/rs7wp9/ within 2 to 4 days at a safe way...........

LG KS360 is widely known as a very slow phone. Literally, every key press is followed with some lag. What you can do to speed it up at least a little bit is to delete unnecessary messages from your inbox, outbox, drafts etc., and also by cleaning up unneeded applications that you have installed.
If this helps, please rate. Thank you

Remove your memory card, if it stops freezing, the card's your problem. Either the card is not compatible (more than 4gb or SDHC instead of SD), or the phone is referring to the card during normal operations eg wallpaper, ringtones etc. Copy these "operational" files to the phone and only use the card for storage of pictures, music etc, but not for anything the phone uses regularly. If the problem persists after you've taken the card out, sorry can't help...

LG KS360 READ CODES: START!
PRESS POWER: OK!
SENDING LOADER: OK!
SETTING SPEED TO 115200: OK!
READING FLASH INFO: OK!
READING IMEI: OK!
READING DATA: OK!
CALCULATING: OK!
NCK CODE: 10076415
NS CODE: 35791389
SP CODE: 79383392
CP CODE: 22663979
SIM CODE: 80971148
HOW TO: 1. INSERT ACCEPTED SIMCARD AND TAPE 2945#*71001#
2. GO TO MENU>SETTINGS>SECURITY>SIMLOCK AND USE CODE.
LG KS360 READ CODES: END!

LG KS360 READ CODES: START!
PRESS POWER: OK!
SENDING LOADER: OK!
SETTING SPEED TO 115200: OK!
READING FLASH INFO: OK!
READING IMEI: OK!
READING DATA: OK!
CALCULATING: OK!
NCK CODE: 10076415
NS CODE: 35791389
SP CODE: 79383392
CP CODE: 22663979
SIM CODE: 80971148
HOW TO: 1. INSERT ACCEPTED SIMCARD AND TAPE 2945#*71001#
2. GO TO MENU>SETTINGS>SECURITY>SIMLOCK AND USE CODE.
LG KS360 READ CODES: END!

www.fonezone.co.uk/unlock.fone/LG/KS360.PHP

I was beginning to think there was no one else from the UK on here :) lol

Here goes, beware its complicated and you can mess up your phone :)

This works without uploading anything to the phone. Just follow the instructions carefully.
You will need 4 bits of software to perform the unlock - get them all now
Download the USB flash loader driver here go the the download USB driver section and find the KS360 United Kingdom Driver.
http://uk.lgmobile.com/web/web.product.manualSoftwareRF.laf
Download the Orange Firmware here (it doesn't matter if you are onOrange or not - it does not get uploaded to the phone, it is justrequired to make the following software work).
http://ks360.assembla.com/wiki/show/ks360/Liens_LG
Download the Extract program here
http://www.pb4kn.co.uk/extract.zip
Download the LG Utils zip file at the top of the list here
http://www.assembla.com/spaces/ks360/documents?c=documents.updated_at&d=down&page=1

You will also need the USB cable which came with the phone - but don't plug it in yet.

Youshould also make sure you have saved all your phone numbers just incase - I have carried this out several times without any problems, butyou can never be too careful.

Follow these instructions very carefully:
1. Install the USB flash loader software (contained in a folder in the first download above)
2. Switch off the phone and leave it off. Do not switch it on until you complete step 14.
3. Plug the USB cable in the computer and phone - wait for it to install all the drivers loaded at step 1
4. Unplug the phone and leave it switched off
5. Create a new folder on your computer (I suggest c:ks360)
6. Double click the Orange Firmware cab file downloaded earlier
7.Select all the files in the cab file. Copy and paste them in the folderc:ks360 - you will need to click save file a number of times.
8. Unzip and run the extract program downloaded earlier
o Type c:ks360Inf_WebDnld.dll and press enter
o Type c:ks360V10G.wdb and press enter
o Type V10G_04 and press enter
o Press enter (and wait a few moments)
9. In the folder c:ks360, some new files will have appeared. Rename KS360AT-XX-V10x-ORG-XXX-SEP-23-2008_slb.flb to KS360.flb
10. Extract all the files from the LG Utils zip file downloaded earlier
11. Run KS360-Utils-EN.exe and choose option N
o type .USB1 and press enter
o Type c:ks360ks360.flb and press enter
o Type STATIC_EEP (get ready to connect the phone)
o Press enter then within 1-2 seconds, connect the phone (still switched off) (timing is critical!)
12. If successful, a new file called STATIC_EEP will appear in the folder where KS360-Utils-EN.exe was unzipped
13. Copy STATIC_EEP to the c:ks360 folder
14. Run KS360-Utils-EN.exe again and select option O and press enter
o Type c:ks360STATIC_EEP and press enter
o The unlock code appears - write it down and close the program.
o (If you get an error message, repeat steps 11-14 - the timing at step 11 is critical to this working)
Now you can unplug the phone and switch it back on

1. Enter the following number (as if you were dialing a phone number): 2945#*71001#
2.When prompted for a password, enter the number you wrote down in step14, press OK, restart the phone......SUCCESS!! Your phone is nowunlocked

When you press numbers do they appear on screen as if you had pressed?
Is it that when you press a key your voicemail just does not respond to the option number you pressed?

If the answer is yes to these it sounds like you have turned off DTMF tones. If it is off, key presses look like they work but actually the phone is blocking the tone for that button from being sent down your line. People sometimes turn off by mistake or to stop their mobile number being visible when calling someone. If you look in menu and make sure DTMF tones are ON it should solve your problem? Hope that helps?

on your phone you will see two of these symbols ( - ) you first press the left one, then it will come up as "press yes to unlock" and then you press the other (-) symbol.