Question about KitchenAid KSM90 Ultra Power Series Stand Mixer

1 Answer

Kitchen aid mixer power lever won't move - KitchenAid KSM90 Ultra Power Series Stand Mixer

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Dedicated:

    Visited the website for 20 consecutive days.

  • KitchenAid Expert
  • 162 Answers

Hiya,

I am sorry to hear you are having problems with your lever.

I have added a link below for our help page on replacing your speed lever:

https://www.youtube.com/watch?v=y97KT98vpJ0

I have also added a link below if you wish to purchase a new speed lever:

9709276 KitchenAid Tilt Head Stand Mixer Part (also 5qt bowl lift) Speed Lever Black https://secure.kaparts.co.uk/sku/9709276

I hope this helps you :)

Posted on Oct 17, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Kitchen Aid Classic Mixer

I have this problem too -it is rather common if you search the web. There was a suggestion posted on this site about what to do. See https://www.fixya.com/support/t125253-mixer_leaking_oil I have also read about other people taking it to a Kitchen Aid repair place where they repacked the grease for about $45. I took mine apart and there is gobs of grease around the gears. Right now I am still trying to figure out what to do. I am going to have my father look at it to see what he thinks since he is good with motors. The Kitchen Aid web site says that the grease is FDA approved, so at least it's not going to kill you if a little gets in your food. Their suggestion is to take it out and run it for about 5 minutes at least once a week. They say it leaks if it is not used often enough. That logic doesn't make much sense to me, but you could try it. Mine seems to leak more when I run it because the grease heats up and liquifies more. I hope that helps. I'll let you know what happens with mine, once it's fixed. Lisa

Posted on Jan 19, 2007

Anonymous

  • 1 Answer

SOURCE: Kitchen Aid Stand Mixer won't release beater

I had this same problem as well.  The beater was stuck like glue to the rotating arm, and it would not budge with any amount of pressure.  I tried the cooking spray and it did nothing.  But today I put a rag in hot/boiling water and then carefully wrapped it around the top of the beater.  I let it sit for 10 minutes. Then I put the rag in hot water again and repeated the process for about another 5 minutes.  When this was done, I covered the beater in a towel (to protect it) and forcefully tapped (ok... I pounded) it with the flat side of my meat tenderizer (it was all I had...you could use a mallet or hammer).  It took a little bit of work because I had to hammer it from the bottom, then the side, then the top to get the little spoke guided through the shaft.  But it did finally come off.  After cleaning with hot water, I put the beater on again and noticed that it was still a little hard to get on/off.  So, I put a little bit of veg. oil on it, and it seems to be better.  Going forward, I will be sure to clean the top of the beater & arm after each use and then coat it with a little oil to keep from sticking.  Best of luck!

Posted on Feb 21, 2009

mastatech

mark milligan

  • 478 Answers

SOURCE: my kitchen aid mixer makes a clicking sound when it is on

Check the motor brushes. You'll see two black plugs with flathead screwdrivera small one, Unscrew to check, if only springs or very worn,youll,know.Its a maintenance problem.

Posted on Mar 11, 2009

Anonymous

  • 1 Answer

SOURCE: Kitchen aid stand mixer bought in US, moving to Europe, 220v 50hz

I can not respond to the warranty issues. My kitchen aid mixer is past warranty as well. I live in a country that uses 220V and my kitchen aid mixer is 110V. I have been using my kitchen aid mixer for almost 4 years with no problems at all.

The converter boxes are supposed to blow the fuse on the converter before it reaches your appliance and cause any problems.

If you purchase a 220V kitchen aid (although it would cost more money) it would probably have more power because of the higher voltage.

Hope this helps!

Posted on Jul 30, 2009

hslincoln

Howard Lincoln

  • 235 Answers

SOURCE: Kitchen aid mixer drops metal shavings in the

Hi REDLACQUER. Sorry to hear about the metal shavings. This is probably not to best way to take iron in your diet... My first thought would be to ask if your mixer is still under warranty. If you’ve had the machine less than one year, then I’d let KA replace your mixer with a new one. However, I suspect like many who seek assistance from FIXYA.com, your mixer is out of warranty, so what can you do?
Have you been able to find exactly where the metal shavings are originating? From the symptoms you describe, it appears that the planetary/agitator shaft assembly may be rubbing against its housing and generating the metal shavings at higher speeds. Have you noticed any increased noise levels/squeaking/screeching when the planetary rotates? It’s also possible that the planetary is out of alignment and not rotating true. Could the agitator shaft been jarred or hit hard during set up or moving in or out of you storage cabinet? Or the shavings could be symptomatic of other internal gear problems, but that would be the least likely scenario as the mixers internal gears are pretty much self-contained.
The good news is that this can be troubleshot and fixed quite easily (OK, maybe with a little effort) by yourself if you are a DITY type person, and feel adventurous. However, before you start to disassemble your mixer, be sure you have the Parts List manual on hand. If you're lacking one, you can download a PDF version from the KA website at: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number, in your case, KP2671, and select the last file, KP2671XWH3.pdf (325.07 KB) listed under Parts List (24) (check to verify that it matches your mixer model).
Turn to pages 4 & 5, titled “Case, Gearing and Planetary Unit”, which provides and exploded view for the disassembly and reassembly of your mixer, along with all the parts. I suspect your Planetary Assembly, Illus No. 15, is rubbing somewhere against its housing, Lower Gearcase, Illus. No. 24.
To gain access to these pieces you’ll need the following tools: a regular or Phillips screw driver, retaining clip pliers, and a small drift pin punch and a small hammer. You need to remove the Transmission Housing (Illus No. 7) and remove all the lubricating grease from the transmission housing and gears (when removing the grease be on the lookout for shavings in the grease which would indicate excessive gear wear). This will allow you to remove Illus No. 25, 21, 18 & 19, Retaining Clip, Bevel Gear, Retaining Pin and Worm Gear Follower, respectively.
Once you remove the Retaining Pin (Illus. No. 18) the Planetary Assembly can be tapped down through the Lower Gearcase Assembly (Illus. No 24). With the Planetary removed, you can inspect it and the inside of the Lower Gearcase to determine where the shavings originated. Be sure to look closely at the Planetary Gear in the lower gearcase as well as the Agitator Shaft Pinion Gear (Illus. No. 12). That will also identify what parts need to be replaced, which you can order online.
You’ll need to replace the grease you removed with new grease. You should use a food-grade grease that you can order online (although I’ve seen automotive bearing grease used too – your call). Do not try to reuse any original grease as it may have ‘debris’ in it.
Here are five potential vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com; and Grainger.com (for grease). You should search for ‘food grade grease’. Prices can vary widely between vendors, so do your comparison shopping.
It can be messy but quite gratifying to diagnose and repair your mixer yourself.
Finally, here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer. The mixers displayed in the links are different KA models, but the principles are the same.

Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able to completely disassemble and reassemble your mixer.
I hope this helps. Howard, Burke, VA
If this solution was helpful, please rate it, thanks! – hslincoln

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kitchen Aid mixer lever will not move...help


Which lever? Speed control or tilt head lock?

Jun 24, 2017 | Food Mixers

1 Answer

Kitchen aid artisan mixer is loose and shaking


This could be the pivot rod between the head and the column being loose and out of place. Or it could be the hook activated by the lock lever not engaging properly. See the following Service Manual:

http://www.kitchenaidparts.eu/documents/pdf/service-manual/classic-svc-manual-new-email-version.pdf

Mar 30, 2013 | KitchenAid KITCHEN AID 5 Quart Artisan...

1 Answer

I have kitchen aid stand mixer and i can't get the beater to attach because the button is stuck??


The button doesn't move. You must push the beater up beyond th notch and turn it while pushing up.

Jan 14, 2013 | KitchenAid KITCHEN AID 5 Quart Artisan...

1 Answer

Who repairs kitchen aid mixers


Call the Kitchen Aid small appliance warranty office and they will tell you where the authorized repair person is that is close to you.

Dec 16, 2012 | KitchenAid K45SS Classic Stand Mixer

1 Answer

The speed lever on my KSM 90 won't lock in the off position.


Do you have a manual? You can download one from Kitchen Aid, small appliances. There should be a schematic and how to that will help.

Dec 16, 2012 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

My kitchen aid K5SS won't run


first check the motor brush and replace them with a new pair. if you never do that check youtube and see a video how to do it.

Dec 05, 2012 | KitchenAid K5SS Heavy Duty Commercial...

2 Answers

Kitchen aid stand mixer bought in US, moving to Europe, 220v 50hz


I can not respond to the warranty issues. My kitchen aid mixer is past warranty as well. I live in a country that uses 220V and my kitchen aid mixer is 110V. I have been using my kitchen aid mixer for almost 4 years with no problems at all.

The converter boxes are supposed to blow the fuse on the converter before it reaches your appliance and cause any problems.

If you purchase a 220V kitchen aid (although it would cost more money) it would probably have more power because of the higher voltage.

Hope this helps!

Jul 29, 2009 | KitchenAid KSM150PS Artisan Series Stand...

2 Answers

Kitchenaid mixer


Try replacing the moter brushes,if not its probably ether wiring or in the switch board.

Jun 01, 2008 | KitchenAid K45SS Classic Stand Mixer

2 Answers

KITCHEN AID MIXER WILL NOT WORK


If you have had the brushes out (under the big screws on each side) verify the cut corner of the brushes are oriented properly. Look inside the hole with a flash light and you will see where the cut corner needs to be.

Dec 31, 2007 | KitchenAid KSM90 Ultra Power Series Stand...

Not finding what you are looking for?
KitchenAid KSM90 Ultra Power Series Stand Mixer Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

162 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...