I installed a toilet it is a kohler cimarron with the pf/2 assembly in the tank. I can't get it to flush all the time and its not clogging? We have the same problem. We have 2 identical toilets. One works fine. The other works intermittently, but mostly doesn't work correctly. It gets low water in the toilet bowl, the water gurgles when it is finished flushing and other various behaviors. Any ideas? I don't think it's plugged, but my plunger doesn't work anyway. It won't seal around the opening. Is there a special plunger for this toilet? Or could it be a component problem within the tank? Any help is appreciated!
Low water in the bowl is only caused by the float being to high! the gurgles is Usually because of air coming back up through the pipe, check your vent pipe that come out the roof. this will help the draining.
I just went though this same issue.
My issue was that the refill tube was out of place. When I put it back in place, the water level in the bowl came up and the burp went away.
2,354 views
Usually answered in minutes!
The toilet is near the kitchen. This bathroom has been there for 20+ years, so I don't think that's related, but who knows. This is a fairly new toilet (installed last fall), and this is a more recent occurance (since maybe March). However, at the moment, it has reverted back to normal flushing with a full toilet bowl of water. I'll keep my fingers crossed!
Thanks for replying. At the moment, the toilet has reverted back to normal flushing with a full toilet bowl of water (no more gurgling either). I'll keep my fingers crossed! If it occurs again (or when I get access to a ladder), I'll get up on the roof and check out the vents - I never thought of that as a potential problem!
Sound to me that the problem could be the plumbing . where is the tolet in the house
gurgling in toilet after flushing using saniflow plus
×