Jenn-Air 34 in. Expressions CVGX2423 Gas Cooktop Logo

Related Topics:

A
Anonymous Posted on Jan 18, 2014

Jenn air expressions - burners clogged - Jenn-Air 34 in. Expressions CVGX2423 Gas Cooktop

4 Related Answers

Anonymous

  • 30 Answers
  • Posted on Aug 21, 2009

SOURCE: I have a jenn-air sealed gas cooktop jcg8430 only 1 burner lights

you have a problem with the ht leads or spark electrodes

Ad

gerbee gomez

  • 222 Answers
  • Posted on Sep 16, 2009

SOURCE: turn on one burner, second burnertrise to light

hi.gud day...tnx for question.im gerbee here in the phillipines, the problem of the the unit is have an dirt or water,& oil coz why the unit is not stoping cliking sound.the best thing to is clean the area were the problem it is,first unplug the unit & turn in off the gas line for the safety..get the vacium & bottle of thinner...first remove all the knobs of the control valve(make sure to remember how to remove the knobs coz if turn back as how you remove it). then drops some thinner located on valve switches(knobs position) 5-10ml,,,then put the vaccium in the place were u drop the thinner to suction the thinner,oil & some dirt.try 2 times for good result...after this if is not work n nid to call an expert tecnician to dismantle & clean the micro swicth one by one(no nid to replace the parts)
tnx gerbee

Anonymous

  • 2 Answers
  • Posted on Dec 14, 2009

SOURCE: Jenn-Air Expressions cvgx2423b manual request

I have a Jenn-Air Expressions cvgx2423b model. One of the knobs fro the burner is stuck in the middle and will not rotate to trun off. So I have to shut down the gas each time. Any body has an idea what is the problme

Anonymous

  • 44 Answers
  • Posted on Mar 21, 2010

SOURCE: Right front burner fails to heat (at all) Jenn air

I suspect a faulty element or electrical connection to the element.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Suddenly my Jenn air gas cooktop ignitors (all of them) do not click and spark, the model is CVGX2423B. I suspect it might be spark module fails, is that right?

It sounds like you need a new spark module which controls all of the burners. It is part number W10475147. It costs around $115.00!
1helpful
1answer

How to remove the top panel of the cooktop?

To remove the top so that you can replace the electrodes, you just need to pull all the burner grates off and knobs. Then remove all the burner caps and rings off so that all you're left with is the cooktop and the burner bases. There are screws going into each burner base. Remove all the screws and the burner bases will pull up and off and then you can pull the top of the cooktop up and off.
0helpful
1answer

3 of the 4 burners clicks and sparks when I try to

Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101
0helpful
1answer

Some burner allways get sparks on we i turne it on even after flame is produced

Either a grounding problem in the ignitor circuit or ignitor leads have been swapped between burners.
0helpful
1answer

1 burner flares and sputters

Hello. Chances are that something on the stove boiled over or got poured into that burner. take it off, soak it overnight in water with dishsoap added, then rinse it and let it dry before reinstalling it. Repeat the soaking in soapy water if necessary until the flaring, sputtering and black soot is gone. regards, Joe
3helpful
2answers

Jenn-air ccg2520 burners will not ignite - no clicking- cn anyone help

check for power by pluging something else in, did it get somthing spilled in it, compressed air blown under knobs removed should doit or just wait for it to dry out are all the burners affected
0helpful
2answers

Jenn-Air Gas stovetop

try to clean the burner and then try it.
2helpful
2answers

Jenn-Air Expressions cvgx2423b manual request

I have the same model with the same problem. The replacement is simple. Remove the burner cap (no tools needed) Take a large crescent wrench and remove the large center nut holding the burner assembly in place. The ignitor will slide out of the assembly once it is removed. Good luck
0helpful
1answer

Jenn-air CVGX2423

Is it clicking? No...bad switch. Yes...check ignitor gap on that burner. The gap or the wiring is bad if it doesn't work.
Not finding what you are looking for?

98 views

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

Paul Carew

Level 3 Expert

3808 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...