Don't know what size and amps fuse to use for T4E250V (#on the fuse)

If the fuse blown.. right next to the fuse on the board it should tell the correct size.. also on the fuse it self on the metal tips it says the size that it is.

The amp rating of the fuse is written on the metal cap on the fuse.

You could have shorted out the mainboard from the power surge. If this is the case, you may only need to replace some capacitors if you are handy with a soldering iron.

If you don't have soldering experience, I would recommend replacing the whole board. Search around online for the schematics, or replacement board for sale

The color code is green yellow brown red brown. I believe that is 54.1k 1%

Google this to find a supplier " 1.25 A GMA AGC fuse " They are commonly available at Radioshack (the Source)

if you plugged a 125 volt tv in to a 220 volt outlet you more than likely fried alof of the componets in the tv. Putting a bigger fuse in there is only going to increase the risk of it catching on fire so i would not recomend that. you might replace the power supply and cross your fingers and hope that nothing else cooked when the 220 volts hit it

New cable as the other one was faulty.

Depends on how hard the fuse blew. If softly, perhaps 1 amp diff is too much.

If hard - blackened inside - then you need to call in a tech.


Mr Bob
www.imageperfection.com

Yes,you are correct.

The main fuse should be a 4 amp fuse not a 1.25 amp.