FIOS remote will not activate Sylvania TV.Tried all codes listed for Sylvania.Customer Service no help. Any suggestions

0029,0022,0067,0038.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

I have the Samsung Sound Bar WS1R model. I tried all of the Samsung codes; TV, audio receiver, and audio amplifier. The DVD code 3918 worked for my Verizon FiOS remote. Program it to your AUX button and it will control the volume while your other buttons; channel, menu, etc work the set top box. I hope it works for you too!

We would be happy to help you with getting your DISH Networkremote to control your Sylvania TV. We're going to start by pressing and holding the TVbutton located on the top of your remote until all mode button back lights comeon, and then release. Use the number buttons to enter the codes for your Sylvania TV; here are some of the codes we currently have: 733, 672, 777, and 569. Press the pound (#) button. To check if the code works try severaldifferent functions on the remote to make sure it will properly operate your TV.Remember that some codes may not be compatible with your equipment. If this isthe case, try the other codes listed for your Sylvania TV until you findone that is compatible with it.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

I am having the same problem with the dish remote on my Sylvania ... need code for sylvania tv that works for dish network remotes

According to Mintek there is no remote code for this TV. Due to problems I've had with their customer service I won't recommend Mintek products to anyone.

I have a Sylvania LC427SSX and can not get the remote to work with the codes given by comcast. Does anyone know the correct code?

There is no code!!! -- Solution...You have to buy a universal remote with learning capabilities. I’ve ordered one that will not only learn off other remotes but can handle 10 components also. I got it from 10x it’s called the iconRemote control…if you call the company they will give you a discount (but you have to call them and ask) AWESOME!

I just got FIOS and had an Olevia 237 TV. Tried the LG, Phillips, RCA and Yamaha codes, no luck so I tried this:

- press and hold TV key
- still holding TV key, press the OK key and release both, device keys blink
- press 922
- point remote at TV and press play button
- press next button (two arrows pointing to right) about 325 times until the TV goes off.

Remote controls power, volume, input, and aspect.

Code 1292 worked like a charm for me!
Vizio SV421XVT

Hello Flagzz. In your post you say you tried the code, I have found 3 codes. Not sure if it only gave you 1 code or if its just a mistype. If they only gave you one code here are the three listed for sylvania for the comcast remotes(any with the all power function).
0054,0030,0171

Also if that doesn't work, here are instructions to run the remote through all the codes:


If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.
Example: You've tried all the codes for your TV, but you still cannot get the remote control to operate your TV.

1. Turn on your TV.
2. On the remote control, press TV once.
3. Then press and hold SETUP until the TV key blinks twice, then release the SETUP key.
4. Using the number pad, enter 9-9-1. The TV key will blink twice.
5. Aim the remote control at the TV and slowly alternate between pressing Power and TV. Stop when the TV turns off after pressing the POWER key. This means that a working code has been found.
6. Press the SETUP key once to lock in the code. The TV key will blink twice.

Note: Use the AUX key to program the remote for an audio receiver or DVD player.




Make sure to do this slowly as if you aciidently pass it, you have to start over.





Hope this helps
-Chris