Induction switch - Jenn-Air JED8230 Electric Cooktop

Very specialised high tech tops need engineers to fix. It is likely to be the power board.

https://www.google.com/search?q=Schott+Ceran+stove+top+with+5+induction+hobs+no+power

..

Miele cooktop induction KM 6350, 6380, 6382, 6383 dE mode
How to switch off demonstration mode
Press ‘power’ button on front and ‘lock’ bottom at same time until you get p5 mode displaying ( it is in programming) mode.
Then press top left to ‘0’, bottom left panel to ‘0’, then press right bottom panel to 9, then press on ‘power’ button to save. This should take it off demonstration mode.

Tthis is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

I have Bajaj Induction Cooker MAJESTY ICX 2 model. While it is working suddenly the display shows E4 and heating stopped. the on/off switch also not functioning. Pl. tell me how I will repair the cooker and what spares are required for repairing.
Thank you,
Susanta Banerjee
[email protected]

E7 error code definition: "Internal Electronic Temperature sensor is opening circuit or short circuit"Solution: Contact technical supportSource: Induction Cooker Error Codes Explained

If it's in child safety mode, switch on the appliance and touch and - at the same time.

safety lock is on. How can I release safety lock?

Throw your circuit breaker that leads to this unit for a few seconds, then reset the breaker This unit is very sensitive to power fluctuations.

check that the hob is wired correctly underneath 1,2,3 should be linked together as live 4,5 as neutral and earth takes its place as earth,

if it is wired correctly then i m afraid the hob needs a new induction element it is all one complete unit on these hobs not seperate so your looking at £1000 + to fix it plus engineer call out charges