- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
SE = Sensor Error, its reported that it could be components bent over, and touching each other on the PCB behind the keypad.
You need to be a fair bit mechanically savvy to attempt a repair, and remember to Unplug it before you do! :-)
SOUNDS LIKE A BAD TOUCH PAD THINKING YOUR PRESSING EITHER THE 1-3 PADS, IT WONT TAKE OTHER PROGRAMING CAUSE IT THINKS YOUR PRESSING THE 1-3 PADS. REPLACE TOUCH PAD
If you mean the display (the microwave works but no info on display) look here for a good diy thread: http://nzlamb.wordpress.com/2010/04/10/sharp-carousel-microwave-lcd-repair/
You can get that repaired for $39.95 in most cases (details
here) or order a control / display unit
here. You can also download the owner's manual from the page at the second link.
We regularly repair such control units for
customers nationwide by mail for $39.95 postpaid in about a
week with a one-year guarantee.
Or can order a modified control unit with our proprietary upgrades for
$115-135 (depending on your model), then if you return your defective control unit in repairable,
good cosmetic condition, we'll give you a core refund of $30-50 (again, depending on your model).
Feel free to contact me directly (and please remind me of your
full model number) for more information & help.
We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.
×