Won't drain - no pumping sounds at all

SOUNDS LIKE A BELT IS WEARING AND INITIALLY SLIPPING THEY WEAR AND STRETCH OVER TIME
COPY AND PASTE THIS ADDRESS INTO YOUR BROWSER'S ADDRESS WINDOW TO DOWNLOAD A COPY OF YOUR EQUIPMENT MANUAL

Could be a restricted drain line. Where does the water drain into after it leaves the drain hose?

Amazon.com: Customer Reviews: Speed Queen 3.3 Cu. Ft ...

www.amazon.com/Speed-Queen...Washer/.../B004ZO...

Amazon.com, Inc.Find helpful customer reviews and review ratings for Speed Queen 3.3 Cu. ... If you need more water in the tub you can hold down the reset switch until the machine ... I tried the delicate wash and spin cycle, but the clothes retain too much water and ..... It takes time to correlate the number of turns and the direction to turn it.Missing: overspeed

Commercial Washer and Dryer Problems

www.affordablelaundry.com/commercial-washer-and-dryer-problems

The water should shut off once it reaches wash level, if it doesn't, and water level hasn't... (these are the glass type fuses) be sure to turn power off before checking them. ... If you have the voltage in, but not out, it's the contactor. .... We repair: Speed Queenwasher, IPSO washer, Milnor washer, UniMac washing machines.Missing: overspeed

[PDF]View document in PDF

Fluid Drive clutch greasy or worn,
Pump blocked or drive belt too loose

Draining before spinning only happens on Whirlpool machines...

No... I work speed queen all day long and I know they can be loud. Just double check and make sure the washer is sitting level. But other than that speed queen washers and dryers are just very heavy duty work horses.

It sound like you drain hose is siphoning off the rinse water, It needs a standpipe make sure the drain hose is at about the height of the top of the washer, Make sure the drain hose isnt stuck in the drain it also needs an air cap. the drain hose should not lay on the floor to run to the drain

Please let me know if this doesnt solve your problems

The tub seal kit is $85 USD, You will also need a drive bell kit$23 USD, you should replace the upper bearing $?, for a complete rebuilt I would also replace the brake pads all three, and the belt, maybe the pump if it doesnt come off easily. Plus what you break taking it apart, so we are looking @ least $150.

Yes you can do it yourself, you dont need the tub wrench if you can borrow a deep socket, its the drive bell seal tool you really need.

Please let me know if you have additional questions. the serial number will tell you the age first two digits are year next two are month, starts with and R, built in Ripon WI.