Technika support sir, when I turn on my technika t.v it goes straight to the tune menu. can you suggest a reasn? regards richard

wait until monday morning

hi i have a technika tv but when i tune it in i dont know how to lock them in

Hello there
the dryer drum rests on rollers that keep it aglinged and straight
if one of these rollers start to wear out this will make the dryer drum misalign which in turn will make the dryer squeel also if the belt is starting to wear this will make it make noises too so i would suggest first opening up the back ofthe dryer and looking at the rollers and seeing if their is any wear from the belt or the rollers and if they are in need of replace ment replace the worn out part ok
Best regards richard

press sys-menu, press right arrow x2 to tuning settings menu, down arrow x1 to auto tuning, press centre button 'ok', now wait

My best suggestion is to contact the manufacturer so that you can get the proper software for your gps system.

Hi i had the same problem but i have sorted mine now. What i was doing wrong was i wasnt tuning in the analoge channels only the freeview digital ones. To do this you need to first turn your tv on. Then press the "source" button, this will bring up a little menu at the top left hand side. When this menu comes up press the "Programme +" button (the one that you use for changing channels near the volume button) press this until you get up to "TV", when T.V is highlighted just wait 3 secs and it will switch over. You will probably get a blue screen with a no signal message (you are now on analogue) when you get this blue screen press the "tune" button. It will automatically start tuning in all of your channels, at first they will be fuzzy but as it works they will become clearer. Your sky channel will also be tuned in. When mine tuned in it didnt tune them in on the right numbers though, bbc2 was on number 1 etc. If you ever need to use a playstation or something it goes into the scart connection at the side of the t.v and you need to press "source" and go up to "scart". To get back onto the digital channels just press "dtv/dvd".
hope i helped!

The retuning process is as follows:

1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
2. Press the BLUE button to display the MAIN MENU.
3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
4. Press the RED button to start the auto tuning process for all available digital channels.
5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

try pressing 9 7 3 5 when on the dvd source and no disk in.
this will get you to the region menu and can then scroll to the region option and then scroll to what region you want or to 0 for region free. then hit enter on the control scroll to exit and hit enter again

well when the blue light is on and ur tv is on standby, just use the channel changing button, simple!

Hello, My name is Richard; I work for Dell here in Round Rock, Texas. From what you describe, it sounds like the menu button is depressed in such a way that small movement activates its function. I could not suggest any real corrective options as this is most likely a mechanical issue with the button, and would require a technician to open the monitor and inspect that. I am not going to recommend you open the monitor case as it can be dangerous. I would suggest you call our tech support at 1-800-822-8965 ex. 726-8859, and find out if the monitor is still under warranty. Regards, Richard B Dell Online Community Outreach