Forgot security code of Nokia 2100

The default security code for a Nokia 3210 is "12345". If you have changed it and forgot it, You can do a master reset to your mobile phone. This could restore your phone with default factory settings. You can get the master reset code for your Nokia 3210 from http://www.unlock-free.com/ for free. Good luck mate.

DEAR FRIEND,YOU WILL HAVE TO RELOAD YOUR PHONE WITH A FLASH FILE.

Hello! Google; Mobile unlocked co.uk...Go to the site...
Input into your phone *#06# to acquire the IMEI number..Follow directions and the unlock code will be e-mailed to you...There is a long list of free codes...Some require a small fee...

Guru..............saailer


I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

0525652035 try this i've check your IMEI on my master coder! hope it would work!

I had forgot my security keyguard code of Nokia 5220 xpm.
imi no is356840020414727 plz tall me

Here is the unlock /master code 1525455225 .It will unlock your mobile security code.You can then set it to anything else you want

hi, i can give you the master code but you need to read this first ok.
1. the master code wont work if you have entered 5 wrong codes as the phone will be hard locked and can only be unlocked using flash lead and unlocking software.
2 the code only works if the phone asks for security code when first swtched on.

If you have not entered 5 wrong codes then this master code will reset the security code and remove it unless you want to put another security code back on the phone.
enter this code when asked for security code ok 4365426660.

This code will only work with your imei number as every single phone has a unique master code based on the imei number ok so double check the imei number before trying the code.
Any problems just give me a shout back ok.

SIM pin code:
This is a pin code that locks the sim card until you enter the correct code. This protects your account, even
if your sim is put into another handset. To reset it, you need the PUK code:
Pin Unlock Code (PUK)
If you miss key (or forget) your SIM pin code, and enter the wrong one 3-5 times in a row, the SIM will lock up, and you’ll need to enter the PUK unlock code to release it. You should ask your Network Service Provider for this code when you need it. Don’t try to guess it, because after a few wrong guesses, the SIM card will be permanently disabled.
Phone Security Code:
This locks the handset, as opposed to the sim card. You can also set some handsets to only accept a “new” sim if the phone security code is entered. To reset it, you need the Master code code:
Master Reset Code
Sometimes known as the Master Code, this allows you to unlock a handset if you have entered the Security Code wrongly too many times.
Which is the one that you want?
The default security code for Nokia is 12345

The only solution for 6300 is go to phone shop or nokia repair centre. Then ask for your phone to be flashed, you may need proof of purchase. Your phone will be fully cleared- back up your things first.

Default security code is 12345
Unlock Code - is 5126700231 only if you have given correct IMEI no of your mobile and mobile model no
----------------------------------------------------------------------------------------------
Low feed backs hurt my ratings and I tried my level best to resolve the issue. so show your appreciation by rating it.
Thanks for using fixya support..You have a wonderful day