Ok, firstly, disclaimer.
This "solution" utilises a "service" menu, that only trained engineers
should use. You are not one, you are an "end user".
So am I, but I paid
attention.
Use of this information is entirely at your own risk, you mess up your
telly, it's your own silly fault. Don't go messing with stuff in there
you don't know about.
Ok.
To bring up the "service" menu, put the TV in standby mode, then press
in sequence :
Onscreen Display ( the little screen with the i+ in it )
5 ( channel number 5 )
Volume Up ( upper end of volume button )
Analogue ( middle top button )
The TV should switch on and when it's warmed up, you should see a screen
with lots of big green lettering on it.
Press the "menu" button ( middle bottom )
Use the direction dial to move down to "LCD Drivers" and press right on
the dial to enter this menu.
Move down to "S H Pos Reg R". It should be "10", change it to "11". (
Left/Right to adjust )
Move down to "S H Pos Reg G". It should be "10", change it to "11".
Move down to "SHPos Reg B". It should be "10", change it to "11". (it's
on the next "page", keeping scrolling down the menu)
Press the menu button to drop out of the menus, and the standy button to
drop to standby. Switch back on, and hopefully your ghosting will be
gone.
mine does the same, i had xbox elite (2 of them) and now a pro consol, thought it was elite problem but the pro consol is the same!! its annoying
same here
also same here
yes just bought mine yestoday gutted tried taking it back . 30 day exempt on argos done the same put on 1080i it ghosting all the time but not on scart only hdmi this is a joke
Snap - ghosting on the HDMI connection only .....
Same problem i had the men out twice to take the tv away to be repaired and it came back the same both times... Still ghost on the channel when i got the xbox on..
The above link is broken!
×