if you send me your email I can send you a copy of my instruction booklet as I have a Lelia 513 too.if you send me your email I can send you a copy of my instruction booklet as I have a Lelia 513 too.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's quite possible the breaking thread is due to misthreading. AVOID using old or bargain bin thread!
Remove all the thread from the machine. Make sure you are using a brand new needle. ALWAYS RAISE the presser foot and rethread from the beginning. Set the top tension to the midway point.
Make sure the bobbin is wound uniformly and that no threads are sticking out beyond the bobbin. Thread the bobbin in the bobbin case and install it back into the machine. (Note: most machines, the bobbin will turn clockwise in the bobbin case when you pull on the thread tail.)
How to thread Janome 3300 sewing machine Ugh, something weird is happening with Fixya. It first link shows a video for threading a serger, when the actual link is for threading a Janome sewing machine...
BRAND new Janome 1420qdc. New needle, doesn’t need oil. Will NOT wind a bobbin. Used almost an entire spook of thread doing this. At my wits end. HELP!
Did you know all sewing machines are threaded in the same way. The parts just look a little different. If you can thread one machine you can thread them all. Dont you have an instruction book? If not get any instruction book for a simular looking machine. There are many you can dowload for free as a pdf file.
im going to help you as much as i can,,,,try using a bobbin that is already threaded and make sure bobbin is in bobbin case correctly, make sure machine is threaded to instructions in book,,,if this is all done exactly u should not have a problem unless something is jammed
×