IR 330 RESET PASSWORD - Canon ImageRUNNER 330s Copier

Try a factory reset. The factory default user and password is 7654321.

Hello to all
I have a client server ir Pass has forgotten his password and I reset.
how reinitialiser server S2 canon ir Pass?
Thank you for the help.

My canon ir 330-400pcl eror E677 how to..

You can clear the password in service mode. Additional Function + 2 + 8 + Additional Function
Go to #CLEAR > PWD

oday I start my printer canon ir 2520 and i see dept id and password prompt screen, I did not reset any id and password earlier, I cannot go inside the menu or i can't take any copy. Please give solution for disable or reset the same.

My Canon C-IR2016 is demanding a Administrative ID & Password.
I did entered the Admin PWD and latter removed it. but can't really
tell what happen that after I restarted the copier, it still requested for
the Admin ID & Password. unfortunately the the details i used before
is not functioning any more. PLEASE I need Help !! thanks

I think that username is: admin, and pass: 0000 or 12345. If that doesnt helps you wrote on [email protected] for service manual.

E-100 is an error of the Laser Beam detect PCB. Either the laser unit is not working or the beam detect PCB is not detecting the beam. You can't see the beam so don't try. Since you are also getting a E-220 which is a Scan Lamp error. Most likely cause is a ribbon cable between the CCD unit and Image Processor PCB. You may need a tech to trouble shoot this problem

JUST HAD THE SAME PROBLEM. THE DEFAULT ADMINISTRATOR PASSWORD IS "BLANK" LEAVE THE PASSWORD FIELD EMPTY AND PRESS ENTER

• Using a Backdoor BIOS Password
• Resetting the BIOS Password using Software
• Resetting the BIOS Password using Hardware
• Vendor Specific Solutions for resetting the BIOS Password

Toshiba's backdoor password is TOSHIBA