My DI-624M previously worked in an Ethernet network including my main WinXP desktop, WinMe laptop and a standalone network printer server plus a WinXP laptop via wireless. I had changed the IP address from the provided default and it was fine. Last week, I downloaded a new firmware, ie, version 2.5 from DLink as di624M_firmware_250.bix. There was problem in loading it to the router per DLink's instruction. It never gave any indication of success. All subsequent attemps failed. Resetting to factory defaults, re-doing network connection setup from the main computer, etc. All LEDs are happily lit or blinking. Systm reports "working properly" in 1394 Net Adapter or Realtek RTL8139 Family PCI Fast Ethernet NIC. The cable modem connected directly to the computer works. Your help is appreciated. Desperately Delinked 10/20/07 23:11 EDT
Hi,
You need to upgrade the Dlink firmware,, that will do it.
335 views
Usually answered in minutes!
I also tried to upgrade from the 1.20 to 2.50 DI-624M firmware. It gave no indication of success. It is broadcasting but I can't connect to it. Attempts to reset it to the factory setting do not appear to work. I can't connect to it at 192.168.0.1. I did find instructions to set my PC network device to 192.168.0.2 and booted the router while holding the reset button. This enabled me to get to the upgrade screen. I've tried upgrading the 1.2 and the 2.5 and still have no success.
Help!
Same problem.
I have the same problem, it does link with the pc but doesn´t link to my webstar DPC2100 cable modem
I have a TECHview 4 Channel that records in *.264 format. I am having no problems with the set up etc. I have not got it ethernet/computer linked. I have backed up some footage onto a USB stick and when I plug into the Macbook I can not read the file due to the format. I have not been able to find a "DVR Client Player" on the net to download, so that I can then view, take stills and etc the captured footage (and intruder). Any help appreciated. Thanks.
×