DMT400RHS/XAA My dishwasher comes on feels up with water and drains 4 times then the normal heavy and smart auto lights blink constantly sounds like its still draining a few times then quits while the heavy normal and auto scan lights stay blinks.It doesnt throw the water inside to wash the dishes it drains all water out just doesnt wash. Dont know where to locate to fix it or what to be
SOURCE: I have a DMT300rfw samsung dishwasher. The other
Hello, jduffy
I was trying to help
you out here. I was going back to some customers that asked questions
in the past and it appeared that no one answered them, so I thought I
would take some of my personal time to see if I can help. Even though
this site may not have your exact model or brand, This link will help
you tons. Here is a link
to about everything you want to know about your dishwasher, from repair
to trouble shooting it,pictures, video's. Just scroll around and you
will see tons of information to almost any question you might have on
your dishwasher. If you go to this link and click around, I am sure you
will find out so much about your dishwasher, you will know more that the
company that made it. Here Is the link for you to click on>>
http://home.howstuffworks.com/dishwasher.htm
Please if this helped you at all, if you can find the time
to rate my help and some kind words written would be appreciated for my
free help , I would appreciate it. Here is also my direct link to my own
pages of other areas of my expertise for other problems you might have
in Automotive,Appliance, and Electronics. Drop In anytime for my help.
Thanks,Mike
http://beta.fixya.com/users/mc1bean
SOURCE: How do I reset DMt400RHS dishwasher?
read you instruction manual, section troubleshooting, go to the menu, and proceed. If you do not have instr.manual download from www. retrevo.com or www.fitness.manualsonline.com
However you can reset from the main power, reset the c.breaker that control the dishwasher machine.
God bless you
SOURCE: My Samsung DMR57 Dishwasher gives me error code
Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the cabinet and start it. Of course this didn't fixed the problem. Then i noticed where the water comes in and I took off the panel on the left side bottom.
Under the panel there is a white box that has a floater inside. The floater is pushing a lever that actuates a micro switch. I noticed that the lever wasn't moving as the machine started to fill in with water. The lever was stuck. An easy touch on the lever fixed the problem and the machine started working.
I will put back the washer for now but if it happens again in the next future i'll have to find a more permanent fix.
1,678 views
Usually answered in minutes!
×