Blade for jomco no. 7 - Oster Golden A5 2-Speed Universal Motor Clipper 78005-140

Blade length is 93" or 7'9" . I get my blades from sawblade.com , I use bi metal 10-14 blade for cutting steels.

The blade size for Ryobi HBS7600 is 190 mm or 7 5/8" . You can a purchase a 7 5/8 inch blade on sawblade.com . They have great quality blades.

here is a picture of the fans 7 blade on passenger side

• Here are two links to the 7 blade to 7 round pin for trailor wiring.
• http://www.easternmarine.com/7-RV-Blade-Vehicle-to-7-Round-Pin-Adapter-47595/
  
• http://www.northerntool.com/shop/tools/product_200303933_200303933
  

• Hope this helps.

7 pin adapter what are you working on.

The blades come mounted in the screen assembly. You will find this cartridge available at shaveroutlet.com. See link below

http://shaveroutlet.com/shaver-replacement-parts/braun-9000-series-pulsonic-foil-and-cutter-cartridge-p-365.html

Some furniture shops used 7 1/4 circular saw blade for other brands of circular saw. Based on my experienced it's applicable as long their is clearance for the blade not touch the adjustable safety cover of the unit. Thanks for asking FixYa.

You will find a large selection in any decent hardware store. You can also use 7" blades in your saw. the important thing is dont go larger than 7 1/4 and make sure the arbor matches your saw(or has a knock-out that will make it match). It's good to have a selection of different toothed blades on hand for your various projects. For basic construction, any brand of carbide tipped blade is fine, for finer work, my personal preference is Freud (less expensive)or Matsushita (more expensive).
Happy sawing:)
Farmerbear

Use penetrating oil to make it loose

The DLC-8 blades and the DLC-7 blades are not compatible. To attach the stem, first attach the stem to one of the compatible blades - the stem should day "DLC-7" for the DLC-7 blades - by inserting the first two tabs of the stem into the first two ridges of the blade connector - the left-most tab should be sticking out past the end of the blade connector - then slide the stem into place so that all tabs fit securely into the blade connector. Next, place the end with the blade up and insert the stem into the middle of the workbowl. There is a video for all Cuisinart food processors on the Cuisinart website.

-Tha Mp3 Doctor