Purchased on eBay additional handset for Panasonic KX-TGA560M

The KX-TGA560 isn't an answering machine. If you have a separate answering machine connected to your phone line, please consult its documentation. If you're subscribed to a voicemail system provided by your telephone company, please contact your telephone company for instructions on accessing their voicemail system.

The KX-TGA560M isn't an answering machine. If you have a separate answering machine connected to your phone then please consult its documentation. If you still have problems, please repost your question specifying the make and model of your answering machine.
If you're subscribed to a voicemail system offered by your telephone company, please contact them for instructions on accessing their voicemail system.

For the KX-TG5672, you should press and hold the Intercom button until the charge indicator flashes. Then press the button to assign the handset # 1, 2 or 3 (keypad 1, 2 or 3). Then press OK on the handset and wait for the handset to beep. These steps must be done within a minute from when the charge indicator flashes. It's best to have the base and the handset close together when you register the handset.

Panasonic has the manual for the TX-TGA560 available here: http://service.us.panasonic.com/OPERMANPDF/KXTGA560-MULTI.PDF . (This manual covers both the KX-TGA560B and KX-TGA560M.) The manual for the KX-TG5672 is available here: http://service.us.panasonic.com/OPERMANPDF/KXTG5671S.pdf .

If you still have a problem, try removing the battery from the handset and disconnecting the power cord from the base (from the wall and the base itself). Wait a few minutes and then reconnect the power cord and the battery for the handset. (Make sure that the base has power and the adapter is warm.) Then try registering again.

I hope this helps.

Cindy Wells

Hi,

You could buy a new handset from :-

http://cgi.ebay.com/PANASONIC-KX-TGA560M-5-8-GHz-CORDLESS-HANDSET-/230557643171?pt=LH_DefaultDomain_0&hash=item35ae4e71a3

The cost of the handset is less than $25. If the unit is under warranty ( less than i year old ), you could contact the service center and get it replaced without any cost.

The average cost of repair is around $75 on this set for display. That is one of the reasons why we recommend buying a new handset. This is a common problem on most of the handsets. We did everything that we could - swapping batteries and making sure that it is properly registered.

I know, it is not a good new, unfortunately there is no reset button unless you take it apart and look for a loose wire or connection. That is the only possibility.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Remove then replace the batteries from the hand set. You should now get dial tojo.

Cannot hear from handset or earphone, can only hear from speaker phone. What can be the problem.

Click Here For Your Manual And Thanks For Choosing Fixya.com.

This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

the digital answer machine did not torn on? Why?

The microphone in handset is broken!