GHW9200LQ Error code F11 - Whirlpool AWM9000 Front Load Washer

Well it is a drain blockage code. Check the pipe. I had a blockage caused by the stalk off an apple and an accumulation of lint!

Miele Dishwasher Error Code = Fault code F11 (Drainage) = Water not draining away. Cause Of Error/Fault Code = Filter combination in the cabinet is blocked.Jun 30, 2016

Miele Dishwasher Error Codes Display & Light Indicator Codes

Videos as well

https://www.google.com/search?q=Miele+dishwasher+shows+code+F11

..

Question edited for clarity.
Question moved from 'Washing Machine' to Gorenge Dishwasher.

F11 - Water Outlet Fault

https://www.google.com/search?q=gorenje+dishwasher+error+code+f11

..

How we solve toshiba washing machine E3 error?

if its a Kenmore model then this message says that the button control board has lost sight of the main control board , but its been my experience that this maybe able to be reset and it may never come back or it will not reset and the control board will need replaced (50/50)


cycling power may reset this

I appreciate the post, dan moore!

From the information you have provided your Frigidaire range is displaying an "F11" error code. Typically, the "F11" error code stands for a shorted keypad. This could be a false error code and the best way to clear any false error codes is to disconnect power from the range for at least ten minutes. If you continue to get an "F11" error code you may need to replace your EOC (Electronic Oven Control), I would recommend having a professional technician come out to properly replace any electrical component to avoid personal injury. Hope this information is helpful to some degree. -Matt

you might need a new User Control and Display Board part number is 8181866. the pic below is the User Control and Display Board looks like that

Sorry to be the bearer of bad news.

F11 indicates a fault with the main control board.

The F11 code means there is an electrical with the Maytag Epic washer. This could involve wiring, fuses or a number of other issues.

Press the "Pause" button twice to stop the current cycle. Press the "Drain" button to remove any excess water. Try to run the washer again. If the F11 code repeats, shut the washer off and contact a service agent
.
The FH error code may be mistaken for the F11 code. The FH code signals a water supply issue and has nothing to do with electrical problems. Check the LCD screen to ensure you read the proper code

Not sure what machine you have?

F11 Error Code for Whirlpool Duet & Duet HT :

F11 is Serial Communication Error, communication between the central control and the motor control unit cannot be sent correctly.

Check all connectors at the motor control and the Main control, check the motor, check drive system for any worn or failed components.

This is the only F11 Error code I could find for a washer.

ck for connection on main control bd and at motor and motor control bd ..most likely suspect is main control ..bad motor control bds are rair