Zenith tv codes - Radio Shack (15-2147) Remote Control

Digit Zenith TV Converter Box Remote Codes
212
254
267
357
454
457
557
657
757
857
955
957
991

4 Digit Zenith Converter TV Box Remote Codes
1415
9910

5 Digit Zenith Converter Box TV Remote Codes
01414
51415

Codes to check with Zenith TVs are: 0121 0009 0050 0078 0091 0138 0059 0131 0038 0111 0134 0153 0064 0004 0135 0226 0227 0245 0247 0252 0266 0288 0310 0338 0358 0023 0058 0039 0001

There are so many codes for Zenith TV to check with.
0121 0009 0050 0078 0091 0138 0059 0131 0038 0111 0134 0153 0064 0004 0135 0226 0227 0245 0247 0252 0266 0288 0310 0338 0358 0023 0058 0039 0001

joe, the remote control codes are not the same from vendor to vendor. I think you're trying to program a universal remote control to operate your tv, if this is so, you will need to get the model number of the universal set and refer to the product code list, look under tv and zenith, another procedure you may try is the code search, this puts out all the available codes programmed into the universal set, just follow the instructions and be very patient because like I mentioned it will take you through all the available codes untill it will send the correct one for your zenith tv.

Try these codes for your remote and TV. The are the Zenith codes for a Curtis Mathes TV.

CURTIS MATHES.....002 103
............................. 112 502 506
..................... 512 601 701 704

These should work.

Regards,

Mike

You can d/l free Zenith remote manual (PDF) here:
http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=b8e8ed044c8bd982f885efd5f432012a&q=Zenith+ZEN100

Try these codes for a Sanyo tv:
002, 312, 412, 506, 619, 902

Good luck!

lost my zenith codes please help, also the manual is now gone ><; please help me .. what code do i use, and how do i input it please, i appreciate the help

I found the code

Zenith Product Codes

TV Mode Zenith Code 101 - VCR Mode Zenith Code 201 - Cable
Mode Zenith Code 353 - AUX Mode Zenith Code 401.

Programming Codes---
TV - 101 149 175

The BNZ110 is designed to be for Zenith by default. If it gets changed and won't work, then take the following steps.
1. Remove the batteries.
2. Hold the power button down for 10 seconds.
3. Reinstall the batteries.

This works for many Zenith TV's.

Here are the codes for Zenith if that does not work.

713 502 606 409 710 701 507 714 405 712 015 916 008 002 115 224 324 126 326 826 228 430 632 435 437 903 407 505