Moto SLVR L7c security code

Yes I have a Moto SLVR L7c and couldnt remember my code at all. it was sitting for a month or so. Now i have it unlocked with no help from motorola at all. Step 1 u will need the most updated drivers for the device. and once it installs moto connect will also install. After that u will want to go and uninstall moto connect in the windows programs instaled. the driver will stay and work great. moto connect causes problems. :) Step 2 Go to mod ur moto website or mobile files.com and find the program that is compatible for yours. It will be a certain service programming software peeps are great there and its free. I downloaded CDMA General 5.3.0 since mine is CDMA. they have GSM also. Once opened click all the side tabs like settings, mms settings, personal settings etc. Then click read and go thru the tabs until it shows four digit codes. Start punching them in and u will eventually find ur code. i found some phones give u the 4 digits code and lists it out but some do not. I know have my SLVR L7 unlocked again and also a few of my friends i have helped also. I hope this helps u. :)

GO TO YOUR PHONE CARRIER THEYE WILL UNLOCK YOUR PHONE FOR FREE

default should be 000000

You need to take the phone back to your service provider and have them change the code back to the factory original which is usually "0000". You can then change it to whatever you want, just don't forget to write it down and keep in a safe place.

To know your password you will have to download a software P2K Advance Editor and p2k drivers those are the drivers by which your phone can be used in p2k mode. you can search for them in google.Connect your phone to the usb port then Run p2kAE (Advance editor) click connect in "p2k mode" you will see that a new hardware is found DON'T select install automatically select "install from a specific list or folder". tick include this location in the search then browse for the p2k drivers folder and select ok it will start installing then click finish. Again you will have to install do the same thing. Once everything is installed you will get a message your phone is installed and is ready for use. now go to p2kAE select phone services click on passwords then click on read from phone. There you are done. Not only that select video and you can increase the recording time of the video you can also record your videos in mp4 format. DONT MESS WITH ANY THING ELSE you will be in great trouble.

Its very easy
1. go to security
2. then go to change unlock code
3.you will be asked to enter the old unlock code
4. press menu then enter your security code

jus press menu once then press 000000 (6 times 0)

Have you tried "000000"

unlock code 1234

security code full 0's

i'll post it here,and if ever u cannot do it just EMAIL me then please.

1. Ok wat u do is to go at the screen where it is asking for the mobile security code.
2. As the problem lies here,either you have forgotten it or watever...here is the trick...
2 (i) at the particular screen just hold on the menu
key,(the one at the top in the middle) keep
on pressing it till it says 'shortcut not allowed
for this item'...
2 (ii) what happened actually u will notice that the
available slot which was only restricted to a 4
units security code has extended to a 6 slot
availability.
2 (iii) now u are done...u just key-in 6 times '0'(zero)
eg. 000000 ...then u press ok.and that's it...
your security code has changed and you will
be asked for a new one.


i hope it works for almost every motorola.cheers.