Cinavia message code 3 - Video Game Consoles & Games

If you are using PlayStation and then you come across Cinavia Message Code 3, you can go to Settings >> date and time settings, then set the date and year one by one to fix it. But after setting, the Cinavia Message Code 3 will appear minutes later.
Another way to solve the Cinavia Message Code 3 is to use a Cinavia removal to remove the protection. You can try Leawo Blu-ray Cinavia Removal

The issue is that you have updated the firmware and Sony has implemented Cinavia Protection that causes the unit to auto-mute. I found a URL that explains a temporary work-around but I would either try to go back to a previous build(primarily one that did NOT give you this issue) or wait for Sony to release a fix for this Cinavia Protection program. I am sure there are game hackers that will come up with a plug-in or a fix for it but would be best to wait for Sony stamped fix before I would do anything.

Hope this helps. How to Get Rid of Cinavia Protection on PS3 Or at Least Bypass it

Cindy, check the post for error 3

http://www.ideerapp.com/solve-cinavia-protection-issue-during-blu-ray-playback.html

Message Code 3 Audio Outputs Temporarily Muted

https://forums.adobe.com/thread/1021879?start=0

Disable Cinavia on Blu Ray Player

How to Solve Cinavia Protection Issue During Blu-ray ...

www.ideerapp.com/solve-cinavia-protection-issue-during-blu-ray-playba...

If you meet Cinavia protection when playing a Blu-ray disc, you can read below to ...uses of some movies and other filmed entertainment in Blu-ray Disc players. ... Pause the video, wait 30 seconds for the audio to be un-muted, then skip over ...

How to Get Rid of Cinavia on Blu-ray Player

www.ideerapp.com/get-rid-of-cinavia.html

The content being played is protected by Cinavia™ and is not authorized for playbackon this device. ... When you play a movie with Cinavia, meidia players or devices will be detected to ... Pause the video, wait 30 seconds for the audio to be un-muted, then skip over ... It is a free player for DVD and general video formats.

Ultimate Cinavia Guide: the protection that refuses to be ...

When you receive Cinavia Message Code 3, then it means that the audio track of your Blu-ray or DVD content contains Cinavia code. One of the solve the Cinavia Message Code 3 is to use a Cinavia removal to remove the protection. You can try Leawo Blu-ray Cinavia Removal.

see the cause and fix it: God bless you

1. Check if the TV and Amplifier (if connected) is turned on and set correctly.
2. Check if the TV, DVD player and Amplifier are connected properly.
3. Make sure the TV, DVD player and Amplifier volume are not set to Mute.
4. There will be no sound output during Reverse Play / Pause / Step / Slow / Search.
5. If the DTS soundtrack is enabled in the DVD Disc Menu, but you are using Stereo Analog audio, the sound will not work. Try switching the soundtrack to Dolby 5.1 or PCM mode in the Disc Menu.

Put film on pause, exit, watch another film for 20 minutes. Return, watch film until message comes up again, pause, exit go back to other film for another 20 minutes. Etc. Eventually you will see the whole film after 4-5 shifts. Otherwise, shun Sony.

Cinavia is an anti-piracy protection embedded into the PS3 and it triggered by some codes in the audio track of the movie.

You cant play Cinavia protected movies on the Playstation 3 native player.

However If your Ps3 is jail-broken you can use a homebrew player to play those movies.

reset settings

Check ur Audio settings should fix ur problem