24v charger hy66 30bb\\''[ol - Black & Decker 18V Cordless Drill/Driver

bad battery or fried charger

press the helpful button and check links below for charger schematics
24V lead acid battery charger circuit

24V Battery Charger Schematic

24V to 36V Battery Charger

No matter how you set up your Prologix Wheeled Battery Charger - 6/12/24V ... you will not be able to play smackdown with it ... sorry.

What model is "the above"?

I have a pro-source 24v hammer drill same as picture above, with a US charger 120v I need a 240v charger where can I get one in the UK

Try T4ah That is what CTM uses for its 24V 5A CHARGERS. Good luck.

Hi. Most chargers with only two wires, have a small bridge wire from the
black ( negative ) wire to the middle terminal of the connector. This disables the controller while the machine is charging. The charger will still work without this bridge wire, but the scooter will still operate normally.
There are a few different chargers around that have an internal relay that disables the scooter, but these chargers are normally "on-board" chargers.
Good luck. Neil.

You indicate that the drill is new. I'd suggest you return it for a replacement. Seems to be a defective or wrong charger. If you have problems and If you paid by credit card call the card company and have them stop payment on that charge.

You will need he correct charger, the 24V will destry a very expensive battery.