My gas oven wont keep the oven temp at the set temp. It seems to initially heat up then does not keep it at the temp. Help!!!
Iwould check and see if the is lighting when the ignitor glows. the oven should light after 30-45 seconds after the ignitor glows. if you have a clamp on amp meter you could make sure it has 3.0 to 3.3 amps. set the temp, wait to see the gow of the ignitor, time how long it takes for the gas to come on, if it takes a minute or two the ignitor is weak and should be replaced. if it comes on at about a minute, wait for it to get to temp and shut off, when it cycles the oven may not light when the glow bar comes on, this is also an ignitor problem. iv'e replaced many more ignitors than sensors, and sensors are more$$$. if you question the sensor, find a friend with an ohm meter and ohm out the sensor, it should read 1080 ohms at room temp (70).
Hi. this is a failing oven temp sensor. the sensor probe is not responding to the oven control. this will cause erratic temps in this oven. it will also damage the control board if the sensor isn't replaced soon.
236 views
Usually answered in minutes!
×