NEC Dterm80 ring tone

Have a coworker call your extension to see if DND is on, they will go straight to voicemail or get a fast busy. Speaker 42 may be the default cancel DND code, depending on your system and whether the codes were changed. Anyway, ringing is set up in system programming. If someone calls your extension it will likely ring, but outside calls have to be assigned to ring in system programming. Usually need a tech to do the programming since it gets complicated very quickly.

Check the controls window and recheck your settings. Set as you like.

The LCD screen of my DTerm80 was showing a "CAMP-ON" message along with someone else's name. I fixed it by pushing the "Exit" button then the second softbutton, under "Clbk", then the first softbutton, under "All". I received the message ""CLEAR CALLBACK CAMP CANCEL"

Fixed my problem.

Order the label sheet directly from Desi.com. Free software available from them also. Sheets fit any printer

Feature 69 feature

Do a search for a plantronics headset. All of theirs work well with NEC

try pressing the ext number then 7

you must assign ringing in program mode. MB 4-01 day and 4-02 night. if this is an elite or ipk. If its ipk2 or 2000 than MB's are different. ldtsnj.com

Press feature; press 9; press #; use key pad to change time; press recall to change am/pm; press feature again to when time correct; new time should show.

im sorry to say the machine you have does not have DRD distinctive ring detect.