I have a Model 2464S that I need a new stopper for. The stopper model number is 764.

Question edited for clarity.

There is a plug / stopper in the base of the water jug.. Here is your manual.

steam bottle - Shark

sharkclean.com http://www.sharkclean.com > manual > SC618H... PDF OWNER'S MANUAL. Model SC618HD. 120V., 60Hz., 1500 Watts. EURO-PRO Operating LLC. 94 Main Mill Street, Door 16. Plattsburgh, NY 12901. Tel.: 1 (800) 798-7398 ...
6 pages

SORRY BUT - You are on the wrong website for this type of inquiry. This is a community based self-help website for the repair and use of manufactured products made for consumer use

Julie,
You need to find the model number of your vacuum and then you should be able to just Google the model number and find a website where you could order the motor. If you put the model number in, it did not come through with your question.

I can't find a schematic for. That model of Kenmore vacuum. Please recheck model number

push down and turn antyclockwise

Some Sunbeam Mixers don't have a model number stamped on them. However, the service number located on the mixer functions basically as a model number when it comes to replacing parts. Hope this helps.

The part can be found at amazon.. take a look here Amazon com thermos Screw top stopper. I hope this was helpful. Cheers

Did anyone help you with this? Did you find - I also need one!

You need some inexpensive parts.

Hoover Solution Tank Valve Seal Hoover Solution Tank Valve Stem
Hoover Solution Tank Spring

Follow the link below

http://www.usavacuum.com/HOOVER-COMMERCIAL-PARTS-s/205.htm

MOST COMMON PROBLEM IS THE ATTACHEMENT VALVE IS BROKEN WHERE YOU CONNECT FOR WATER ON SIDE OF MACHINE. THESE MODELS USE AN ELECRONIC SOLONOID TO ACTIVATE WATER TO NOZZLE IF IT IS COMING OUT THERE SOLONOID MAY BE BAD