Microsoft Windows XP Professional Logo

Related Topics:

Posted on May 18, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Pc does not start after boot screen

My PC does not run Ahead after the BOOT SCREEN.... It simply shows a cursor and nothing else.... PLZZZZ HELP!!!!!

Answer This Question
  • Anonymous May 11, 2010

    That means your computer has passed the POST, then handed the process off to your boot device to load your operating system, then stopped.

    Your boot device is no longer loading the operating system. If that is your hard drive there are a couple ways to attempt to repair it. I suggest you back up any critical data on the drive first. Put your Windows XP cd in your cd drive and set your BIOS to boot from cd. Then when you get to the Windows repair console type fixmbr. After that finishes set your BIOS to boot from your hard drive again and see what happens.

×

3 Answers

will joe

will joe

Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Sergeant:

An expert that has over 500 points.

  • Microsoft Expert 321 Answers
  • Posted on Jan 09, 2023
will joe
Microsoft Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Sergeant:

An expert that has over 500 points.

Joined: Feb 04, 2022
Answers
321
Questions
0
Helped
136016
Points
930

To fix a Windows PC that won't turn on, first try ruling out a faulty power supply or outlet. You can also try checking for beep codes, display issues, unusual BIOS settings, or troubleshooting the PC in Safe Mode. Other fixes include disconnecting non-essential devices and checking for loose components and malware.

Regards,
Will

Asko Mitrunen

Asko Mitrunen

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 11, 2015
Asko Mitrunen
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Jan 11, 2015
Answers
1
Questions
1
Helped
91
Points
3

Have you tried to use ESC key to enter manual boot? Manual boot allows you to choose the right boot device, then RETURN should initiate the boot and system shoud function properly.
I have the similar problem and try to find the original reason. My system works perfect but needs to start ever time with this additional odd procedure.
Asko

Ad

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Hot-Shot:

An expert who has answered 20 questions.

  • Expert 91 Answers
  • Posted on May 18, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Hot-Shot:

An expert who has answered 20 questions.

Joined: May 11, 2009
Answers
91
Questions
0
Helped
48039
Points
227

Reboot PC, and hit F8 until you get into Repair mode. Then restore your PC to your configuration that last worked?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hard disc not working
1st. How many hard disk have u on your computer?
2nd is it booting from the correct one?
Identify your boot drive a choose THAT hard disk in the BIOS.
If U don't know how to get into BIOS setup read your PC manual
That what it is for....
And What does shows nothing means?
Black screen with cursor?
Dead Monitor?
Please stated your problem clearly
Read full answer
Jan 28, 2014 • Western Digital Computers & Internet
0helpful
1answer

Wont go to login screen on boot up
When booting, try hitting F10 or F12 to access the system BIOS. then go to boot device and make sure its booting from hard drive first
Read full answer
Feb 02, 2013 • eMachines EL1352G-01w (884483537679) PC...
0helpful
1answer

I have an acer aspire 4720z. It was just fine until about a week ago and now it won't boot up. It will turn on and go from the white Acer screen to the boot menu, where it gives the options of...
if you can get hold of a windows disc try booting from that and using the repair option.
Read full answer
Sep 16, 2012 • Computers & Internet
0helpful
1answer

My a6120n PC will not boot up
Press ctrl+alt+del to open up the task manager now go to Run-->msconfig press enter it shows windows start up manager in that go to start up tab and check disable all now apply close restart it wil boot up it may be a cause of threats
Read full answer
Jul 08, 2012 • HP Pavilion A6120N PC Desktop
0helpful
1answer

Emachine EL-1200 shows flashing dash cursor top left of screen
If this is all you get after the post screen, then your operating system has become corrupt or the hard drive is having issues in the boot sector. Reload windows from your installation CD. This will of course wipe out all your information, but the computer should run. If not then I would suspect a bad hard drive.

Hope this helps
Read full answer
Jan 30, 2012 • E-Machines Computers & Internet
1helpful
1answer

Monitor comes up black i can see the cursor but nothing else any ideas? it boots normally but once past the boot screen its all black with just the cursor showing
Nevermind the more I thought about it, your not getting to the operating system. The PCs used to say something to the effect of 'operating system not found' after the POST if it could not find a boot device. I think that's what's happening here, you have to go into to BIOS and see if it can detect the hard drive. When the laptop boots look for a message saying 'press F1 for setup' or something along those lines... if it comes up too quick to see start hitting F1, Esc, Del keys right after the power lights comes on, BIOS is usually one of those keys. Once in BIOS look for a 'devices' type tab and search for where it reads the hard drive If there's nothing there then its your problem, and you need to get the BIOS to autodetect it. Respond if you have questions.
Read full answer
Jan 11, 2012 • Toshiba Satellite A215-S5818 Notebook
0helpful
1answer

Need recovery **** for modle# w4885 it wont boot up , nothing but black screen and cursor flashes
When you go back to boot up, and you get to the Dell screen, can you please start tapping the F8 key, that should bring you to a start up menu, where start in Safe Mode is an option. If you can get there, please go to Start, Run, and type in sfc /scannow, exactly as shown, with a space between the c and the /, then hit Enter. If you have any missing or damaged system files this should repair them.

When this has completed, please go to Start, Run, and type in MSCONFIG, then hit Enter. On the General tab, click on Diagnostic Startup, then reboot the PC. If you can get to the log in screen, then one of your startup programs is causing the problem. If not we'll have to look for something else.

Is there any kind of error message other than getting to the black screen? Is the screen completely blank or is the cursor next to something, a letter, or symbol?
Hope this helps.
Read full answer
Dec 04, 2010 • E-Machines eMachines Desktop PC
0helpful
1answer

I have an acer aspire one that is stuck on the start up screen showing acer empowering people and it wont go past that screen. iwas told it is a software issue. is there a simple fix for this?
Does it boot into safe mode (Tap F8 key on booting)

If so then a driver is responsible. Simply boot into safe mode and type msconfig into start / run.

Tick everything except antivirus / spyware program.Reboot and tick the box that pops up.
Read full answer
Mar 25, 2010 • Acer Aspire One PC Notebook
3helpful
1answer

HP Compaq NC6220 won't boot
I'm running into the exact same issue. Were you able to resolve the situation?
Fatima
Read full answer
May 16, 2009 • HP Compaq nc6220 Notebook
0helpful
1answer

H6325
frozen boot screen on hp h6325
Read full answer
Apr 30, 2008 • HP iPAQ h6325 Pocket PC
Not finding what you are looking for?

View Most Popular

Windows XP Professional

  • Computers & Internet

Related Question

Hard disc not working

  • Western Digital Computers & Internet

101 views

Ask a Question

Usually answered in minutes!

Popular Questions

Dell Drivers XP drivers for vostro 1400 ..

Microsoft Windows XP Professional...

D:\ application can not run in Win32 mode

Microsoft Windows XP Professional...

Want to remove you may be a victim of software counterfeiting

Microsoft Windows XP Professional...

AVG Free install fails

Microsoft Windows XP Home Edition

How i can make xp proff service pack 2 bootable pendrive, cd,sdcard

Microsoft Windows XP Professional...

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Microsoft Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...