Kenmore 44042 - No spin cycle

Springs are worn out on the drum & unbalancing loads

The load has become unbalanced. Pause the machine in mid-cycle (do not Stop it) and when it ceases spinning, open it and re-distribute the load evenly. Then press Pause again to continue the cycle. Note: if you Stop it, then restart when finished balancing, the machine will start washing from the beginning instead of continuing from where you Paused it.

ul usually stands for unbalanced load,if a top loader then suspension rods have worn out, fron loaders are more complicated

Kenmore Elite Top Load Washer - Unbalanced Loads ...

www.shopyourway.com > Manage My Life > Questions

Recently, the "LF" code has started to display and the soak cycle will not complete unless I ... Kenmore Elite Top Load Washer - Unbalanced Loads During Spin Cycly ... Would a bad outer tub literally cause the basket to become unbalanced?

Fix Unbalanced Top Load Washer - YouTube

? 1:21
https://www.youtube.com/watch?v=cVZIGhULzg0
Jan 17, 2014 - Uploaded by Carpe Diem
How to fix unbalanced high efficiency top load washer. ... I am having a MAJOR problem with unbalanced ...

Off Balance load in spin cycle - Sears ... - YouTube

Is it a GE front loader ?

Kenmore front loader. stopped at rinse. First ck to see if you washer works at different settings if so its very possible its your timmer or what called the wig wag or solonoid this switches the machine to spin & rinse. A basic service call should resolve your problem.

I have kenmore washer front load H2 after 1st circle of wash it stop and start beeping with code F11. My email address is anarfi1212@ live.com

It appears as though this is a known problem with the spin control board component, so ordering a new board should solve the problem.

Most common cause for the machine to shake during the spin cycle is due to a unbalanced load. A load of a couple of small bulky items or a small load in general may not be able to distribute the weight properly causing the machine to be unbalanced. It is best to wash full loads whenever possible. We have a brand new front loader as well, our first load about took the walls down...We just tossed a couple things in to see how it worked....thats how I learned to wash full loads. Now with the knowledge of why it shook so bad, we have had no more problems. Hope this helps

Please take the time to give this solution a fix ya rating

clarkco

lid switch is broke lever probley broke off or screw holes broke out due to off balance load forcing tub over against switch lever