Question about Sharp 13VT-N100 Combo

1 Answer

Do I need a digital converter box for sharp 13VT N100

I do not have cable service, do I need a converter box for my sharp TV/VCR 13VT N100 to work after the June 12th digital broadcast conversion.

Posted by on

  • shekerah May 21, 2009

    Thanks stoneheaded I thought so, but it's a bit confusing because the instructions to use a digital converter is to connect it to rabbit ears antennae, but I don't use an antennae. My tv is connected to the cable wire in a cable-ready apartment, even though I don't get cable just the local channels. So that would mean I have to buy both a converter box and a tv antennae right?


×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 814 Answers

Yes you will need on because you are receiving a analog signal and will not decode the digital signal without one.Hoe this answers you question.

Posted on May 18, 2009

  • Anonymous May 23, 2009

    The converter will need a adaptor also. Unless you can get one that is designed for coxial use too.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I record a tv program with a Sharp A400 VCR? Videos will play on the tv, but I was not able to get it to record. Thanks.


Your VCR is no longer capable of recording "off air" tv signals. All tv stations are now broadcasting in digital format, your VCR is analog only. You can however get a digital converter box that will receive "off air" digital signals and convert them for recording on your VCR. CLICKING HERE will give you all the information you need to hook up the converter box... Good Luck!

Nov 10, 2009 | Sharp VC-A410U VCR

1 Answer

Can't get digital converter box to work with Toshiba TV/VCR Combo


You will need to rescan your stations. On the June cutoff date, they reshuffled and renumbered most of the stations.

Jun 16, 2009 | Insignia Digital-to-Analog Converter for...

1 Answer

Will a converter box that will change analog to digital work with cable as well and how?


The short answer is no. There is no need for a converter if you have cable. The converter is only required if you have an external entenna either on the roof or as rabbit ears. The broadcast (over air) standard will change as of June 12th to ATSC which is a digital standard from NTSC or analog. Dan

Jun 10, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

IS THIS TV ANALOG OR DIGITAL?


Hello,This set is Analog and will need a converter boxThank you,Shuttle83http://www.electron-age-technologies-llc.com

Jun 10, 2009 | Sharp 13VT-K100 13 in. Combo

1 Answer

Is it digital? will I need a converter box?


The conversion to digital affects off air reception. Since you have Comcast analog cable, you will not be affected until Comcast decides to discontinue analog cable, which is not likely any time soon.
When that day comes, your old VCR will probably grace a landfill anyhow, and you will need a converter box from Comcast.

May 13, 2009 | Mitsubishi HS-U446 VCR

1 Answer

Mitsubisi tv CS- 40307 digital capable ?


If you are subscribing to cable or satellite TV, then the answer is no; they will continue to send an analog signal to your TV. However if you are using an antenna to receive your broadcast, then you will need a converter. Broadcast TV (over the air) has switched to a digital signal for most of the channels as of June 12th.

Feb 22, 2009 | Mitsubishi CS-40307 40" TV

1 Answer

User Manual




The Manual cost $6.50 and is available from the manufactures web site . see link:
http://www.sharp-cart.com/ecom/accessories.htm?action=getSearchItems&ss_id=10&view=catalog/ss_items

Dec 08, 2008 | Sharp 13VT-N100 Combo

1 Answer

I have a AKAI CFTD 2085 model tv. Is it digital or do I need a converter box?


If connected to cable or satellite your tv will work after digital conversion occurs. If using an antenna, look up a local TV station to see if they're already broadcasting in digital. Most are. Enter that DIGITAL channel # using your remote. If you get a picture, you don't need a converter box.

Dec 04, 2008 | Akai CFTD2085V 20" TV/VCR/DVD

1 Answer

Sharp tv/vcr combo


go to menu go channel auto search

Dec 13, 2007 | Sharp 13VT-N100 Combo

Not finding what you are looking for?
Sharp 13VT-N100 Combo Logo

Related Topics:

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6069 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...