I get power to the stereo(alpine 102) but no sound comes out error message with dc error shows what does tha mean
Hello eklypss2000,
According to the manual for the Alpine CDE-102, the message "DC ERROR" is displayed if there is a short to ground in the speaker wiring. Check all of your speaker wires and make sure that no bare wire is shorting against the vehicle metal or against other wires. Repair or replace the wire as necessary. After correcting the problem, set POWER IC to "POW ON" according to the instructions in your manual.
Hope this helps.
Disconnect the speaker wire plug and restart the stereo without the plug connected, the power ic option should be there now!!
I had no error message for s ground fault!!
2,151 views
Usually answered in minutes!
×