Samsung HT-XQ100 System factory reset - Samsung HT-Q100 System

SOURCE: HDMI conection

Hi.
Connect the Home cinema and the TV with the HDMI cable. When you turn it on, first turn on the TV and then the home cinema. I hope this works.

SOURCE: Hi My samsung HT-XQ100 home theatre system will

I have the same problem, looking for a solution as well..

SOURCE: I have a HT-XQ100 home theatre system when trying

try a dvd cleanig kit or unit colud be overheating. unit needs room to breathe

SOURCE: My Samsung HT-DM550 shows "lock"

Be careful to do this with AC cable disconnected from AC outlet! If you have some experience with electronics, disconnect the wired plugs from power supply and discharge electrolitic capacitors to ground with a 330 ohm 1 watt resistor. Then reconnect the wired plugs. Be careful to do this with AC cable disconnected from AC outlet! Then connect to AC outlet and turn on the DVD player. You will see that DVD player restores to normal operation again.
[email protected]

SOURCE: When I turn on the unit I get a symbol that is a

Your fan is bad.

The system is intelligent. It knows it will overheat without a fan. It also knows there is a problem with the fan, so it throws its self into self-protect mode to keep from overheating.

Have a tech check your fan.

;o)