Hello,i have this systerm is home theater and it has lost some functions ,dvd and tv setting works very well but the radio and the vcr has lost it setting and acording to the technical support of targa i must write a software on a cd and burn it and i have try it and it still dont work but i think i am not doing the right thing as i dont realy dont the instruction properly so can any one help me thanks
regards from ALEX
Hi,
well it can be recovered by factory reset and is to download from there sit and burn the firmware. It will definately solve ur problem
Thanks!
Sandy
First of all HOME THEATER DOES NOT use SOFTWARE. Can you please explain to me what you mean by lost functions or lost settings? Do you have a special type of Cable or Satellite Program that requires updates? I can not think of a reason for a Basic Home Theater System to need a Software Program. Please try to explain this to me in detail, so I can provide you with the SOLUTION. Thank you
What you need to do is called firmware upgrade.
You need first to download a disk image file (ISO type file)
Then you burn the ISO image on CD using a software like Nero.
Then you start the unit with image CD inside and the firmware will be automatically installed.
The ISO file can be downloaded from Targa website here, by entering your model number.
If you have problem in locating the firmware download, write them an Email to receive the right download.
ensure you download the right firmware for your model, downloading wrong firmware may damage the unit.
You can contact manufacturer here: go to form
Once you locate the firmware download iso file, and when download is complete, use a computer with CD burner to write the image TV.
If you do not have any ISO burning software you can download Free iso software by FreeISO
After that start the system with the CD inside. That will install firmware and fix the system.
Regards.
Hi Alex.
The ISO file is a complete cd pre-packed image, so to burn a CD from ISO file all you need to do is opening ISO file with an ISO burner software, and then chosing burn CD or record CD, depending on the software you use.
If you do not have an ISO burning software install one of the following:
ISO Image Burner 1.1
Your Free DVD Burner 2.0
Free Easy CD DVD Burner 1.3
Once the ISO burner software is installed, start the ISO software program, go to open file on the software menu, locate the downloaded file Firmware_xxx.ISO, open it , put a blank CD in CDRW, and chose burn. The CD will be ready to use after burning.
×
Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
DVD/VCR Receiver to a standard (analog) television,
set Progressive Scan to Off
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To ON and OFF this function, Press "Setup" to display the setup screen.
Surf through, and hilight "Progressive scan" and press "Ok or Enter"
Here you can set this function ON or OFF. If you wnat to get it OFF, select OFF and press Enter.
OK.
436 views
Usually answered in minutes!
hello,the firmware update comes with instruction and in it we have (Firmware_xx.iso) and also says the folder structure on the createddisc should be , /lg_dvd/firmware/upgrade/lg. i understand the instructions but i dont understand burning the firmware on a cd mines to copy the whole download on the cd ? thanks.
thanks, i am able to burn the firmware to cd successfully and i will let you know when i get the upgrade correct.
with much regards ALEX
hello, my system use to play allmost all kind of cd and dvd ,radio and vhs and now the radio signal is off and it cant play vcr dics. the tchenical support on the internet say the lost of this functions can only recover by factory reset and is to download from there sit and burn the firmware of this targa and it come with instructions and i am not able to do thi job right thanks.
×