Kenwood KDC-MP235 CD Player Logo
Posted on May 15, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Problems with kenwood kdc-mp2028

I have hooked up an amp to my current cd player and speakers in the back. How do I make the amp power on with the cd player. I have the back speakers running to the amp which then runs to the stereo. The wiring should all be right, but the stereo not reading the back speakers, it should be reading them through the amp. Unfortunately, I don't have the remote for this system any more either, so everything must be done by the face plate.
Thanks

Answer This Question

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Expert 232 Answers
  • Posted on May 15, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: May 01, 2009
Answers
232
Questions
1
Helped
137944
Points
741

The remote from the amp should be connected to the remote (blue wire) or power antena wire from the radio.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How would I connect to Kenwood KDC mp242 CD player to a zero turn riding lawn mower
https://diagramweb.net/kenwood-kdc-mp245-wiring-diagram.html

Hook up the power source to the battery, wire in some speakers.
Read full answer
Jun 16, 2022 • Kenwood KDC-MP242
0helpful
1answer

I want to hook up a 12 inch speaker in my trunk of a 2000 Grand AM, I have the Kenwood excelon KDC-X792 cd reciever with USB interface. I want to get the wire diagram to see if it has the connectors for...
http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Consumer/Manuals/kdcx792.pdf
Page 34 has what you're searching for.
Read full answer
Sep 13, 2009 • Kenwood KDC-X792 Car CD/ MP3 Player
6helpful
1answer

Hooked up the kdc-mp332 without having speakers connected to the unit an it still reads protect what do i do?
shut it off connect speakers and re set it


never ever hook up an audio system with out speakers this will blow the amp transistors.
Read full answer
Jul 03, 2009 • Kenwood KDC-MP332 CD Player
1helpful
1answer

No sound from my front and back speakers in my van ive got subs
Make sure that when you hooked up your 4 channel amp to the remote turn on lead it is the same as the sub. Only hook amps to the Blue w/ white strip. The solid blue is power antenna lead and will lose power when on CD, ipod etc and only stays powered when the Tuner is on. Hope this fixes your problem.
Read full answer
Jun 03, 2009 • Kenwood KDC-MP428 CD Player
0helpful
1answer

Kenwood KDC-MP538U - no sound.
My issue was that I didn't have the blue "amp" wire hooked up and I had a factory amp.
Read full answer
Jan 06, 2009 • Kenwood KDC-MP538U Car CD/ MP3 Player
0helpful
1answer

Kenwood kdc mp528
thats an overload protection circuit....its protecting the internal amp from getting fried...do you have aftermarket speakers in the vehicle?
Read full answer
Sep 30, 2008 • Kenwood KDC-MP528 CD Player
1helpful
1answer

Need code
hi, KDC-MP2028 is the model, what you need is the serial number printed on a tag at the back of the stereo
Read full answer
Jun 22, 2008 • Kenwood KDC-MP235 CD Player
0helpful
1answer

Kenwood kdc-1028
the remote is blue - the ignition wire12 volt is red - the battery line 12 volt is yellow
Read full answer
Mar 26, 2008 • Kenwood KDC-1028 CD Player
0helpful
1answer

Kenwood kdc-mp528 amp/speaker problem???
This is a common mistake. This problem indicates that you are using the solid blue wire from the head unit to the remote turn-on on the amp. This is a power antenna wire that only receives power when on FM radio. You need to replace this with the Blue & White wire from the head unit (power control wire) to your remote turn-on on your amp. This should solve your issue.
Read full answer
May 12, 2007 • Kenwood KDC-MP528 CD Player
0helpful
1answer

My deck doesnt not transmit signal to my amp. Is this an rca cable problem
Hi Your problem is almost defenetly that one speaker is hooked up with reversed polarities, making one speaker cancel out some vibrations of the other speaker. So get the wiring phase checked again, its ethier this or a fauly cable. Good luck.
Read full answer
Mar 21, 2006 • Kenwood KDC-MP728 CD Player
Not finding what you are looking for?

View Most Popular

KDC-MP235 CD Player

  • Car Audio & Video

Related Question

How would I connect to Kenwood KDC mp242 CD player to a zero turn riding lawn mower

  • Kenwood KDC-MP242

Related Topics

418 views

Ask a Question

Usually answered in minutes!

Popular Questions

Aux out put

Kenwood KDC-135 CD Player

Mecha error

Kenwood KVT-717DVD Car DVD Player

Kenwood no sound

Kenwood KDC-S2009

Toc error

Kenwood eXcelon KDC-X879 CD Player

Turn aux on on kenwood kdc-mp205

Kenwood KDC-MP205 CD Player

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...