Please provide me Service Mode code for Sansui Hard Rock 21 eye model tv
Hi I want sansui 32" led service mode pls
If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
SOURCE: TV MODEL :SANSUI HARD ROCK
Hi The problem of your teevision is what we called the vertical line problem.The problem is in the vertical section of the board.There are many of cause of that problem.First is either loose connection,the circuit at the vertical section have cold solder so its need to resolder using soldering iron.Second,it maybe no vertical supply,its better to check the 12 volts dc supply of vertical ic output.if thers no supply in the ic,there a open resistor near the flyback.try to replace.Third if theres no loose connection and have a voltage supply the problem is either leaked capacitor or deffective vertical ic output. Commonly in that problem is the loose connection,try to resolder the verical section.
Type in this link address, [without brackets] either to Google Search Box or into the Address Bar to your browser and press Enter. It has all the details about how to enter into the service mode to many brand TVs, and how to adjust data values.
electronicshelponline(.)blogspot(.)com
In name [Electro-Help]
1,633 views
Usually answered in minutes!
Use "wwlr 800 TV unified rcu "remode control for open service mode for "sansui hard rock 21
eye"
Press serv key to the last row of remode "wlr 800 TV unified rcu" than will open service mode.
×