Flashing Green Light on Front of 73" Projection TV

If the green light is flashing on your Panasonic TV and it won't turn on, it usually indicates that there is a problem with the TV's power supply. Here are some troubleshooting steps you can try:

Unplug the TV from the power outlet and wait for a few minutes before plugging it back in. This will allow the TV to reset.

Check the power cord and make sure it is securely plugged into the TV and the power outlet. If the cord is damaged, replace it.

Check the power outlet by plugging in another device to see if it works. If the outlet is not working, try plugging the TV into a different outlet.

If the above steps do not work, you may need to contact a professional technician to diagnose and repair the TV. It could be an issue with the power supply or other internal components.

I hope these steps help you resolve the issue with your Panasonic TV.

Hi,

It sound like the remote is powering off the cable box but not the TV. The remote control may need to be reprogrammed to the TV. When you press power it may only power off the Cable box. At that point, try pressing the TV button on your remote and then Power. If it does not power off the tV after pressing the tV button, the remote may need to be reprogrammed to the tv. Cable companies usually have the codes needed to program their remotes to the TVs.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/laura_08254539050d64db

Have you tried accessing the led self diagnosis by pressing the menu button and Input button both in together and hold for 6 seconds on the front panel of the set. It should then blink a two digit blink sequence from the power indicator. which will repeat several times let me know the blink sequence and I will assist you.

capacitors have failed. You can get the repair kit called the V26 Chassis DM/Power repair kit from www.tvrepairworld.com which contains the caps and the instructions.

MY philips tv model number 55PL9773/17 WAS TURNING OFF THE SCREEN AND LEAVING THE AUDIO ON FOR ONE MINUTE. THEN THE YELLOW LIGHT STAYED ON. THEN THE LIGHT TURNED OFF. thEN I TURNED ON WITH THE REMOTE AND THE YELLOW LIGHT TURNED ON AND A FEW SECONDS LATER CHANGED TO THE GREEN LIGHT AND THE TV TURNED ON. AFTER A FEW MINUTES, BETWEEN 10 AND 30 IT DID THE SAME THING. NOW IT IS OFF WITH A BLINKING RED LIGHT PERMANENTLY ON. TO TURN IT OFF I HAVE TO UNPLUG IT FROM THE WALL. I REPLACE THE LAMP A FEW WEEKS AGO AND IT IS FINE.

Some of these sets if you unplug them---The green power light will blink for about 70 seconds before it stops--this is normal as the receiver unit in this set is booting up. Wait for the light to stop blinking and then the set should turn on. Some of these sets develop a problem where the light never stops blinking--usually the receiver is now bad--very expensive to get fixed.

I do this here for free so if this helps you give me a vote here.

SD TECH (San Diego)

The green light on the front blinkes and does not stop even after hitting re-set button.

The green power light is continually flashing and the tv will not turn on. I hit the reset button and nothing happened. I have exhausted all other troubleshooting methods. Please help, what should I do?

Needs DM module repair = replace four 1000mf/25v 105 degree
caps..www.chrisandnat.com/projects/blinkingtv/blink.htm
.......................T.

I have the same problem. The only way to get the TV to come on is to unplug it, but once you get it back on it turns itself off again in a few minutes.